○Chuck 9 inch 3-jaw scroll○Swing capacity Swing on bed φ435mm Swing on carriage φ250mm○Bed dimensions Center distance 850mm Bed length 1880mm 6 shaku Bed width 352mm○Spindle capacity Spindle through hole φ52mm End shape A1-6 Spindle rotation speed 32 to 1800rpm (12 steps)○Tool rest Square tool rest Square tool 25mm Horizontal feed table travel 255mm Tool rest travel 150mm○Tailstock travel 150mm Tailstock shaft MT.No.4○Motor For spindle 3.7kw4P○Machine size Dimensions Width 2241mm x Depth 945mm x Height 1254mm Weight 1935Kg

TOSHIN MACHINE TOOL CO.,LTD．

○Spindle Chuck 10 inch 3-jaw Separate jaw type Speed range 25-1500rpm 12 steps Spindle tip shape A1-6○Capacity Swing above bed φ510mm Swing above carriage φ300mm Center distance 1000mm○Carriage Cross feed table travel 285mm Tool post travel 145mm Tool post shape 4-corner Bit shank 25mm○Tailstock Tailstock shaft taper MTNo.4 Tailstock shaft travel 150mm○Machine size Bed width 370mm Bed length 2170mm Required floor space Width 2500mm Depth 1050mm Machine weight 2000kg

TOSHIN MACHINE TOOL CO.,LTD．

Used for electrode cutting. Capacity: Machining capacity φ70×L300 mm Swing above bed φ220mm Swing above saddle φ100mm Base dimensions: Bed width 155×total length 850 mm (2.8 shaku) Spindle: Standard compatible chuck 4-inch three-jaw End shape: Hasegawa standard Rotation speed: 50hz 650, 860, 1135, 1300, 1500, 1720, 2270, 3000rpm (8 stages) Through hole φ25.5 mm Tailstock: Tapered hole MT.No.2 Center distance 380 mm Thread cutting: Lead screw diameter φ22 mm Lead screw pitch 3 mm Thread cutting range 0.25 to 5 mm Motor: For spindle 1.5/0.75kw (4/8 pole conversion) Machine size: Dimensions: Width 1270 × Depth 570 × Height 1130 mm Weight: 650 kg ○ Other This product [WHN-1 type lathe] does not have automatic left/right and front/back feed. Also, since it is used for cutting copper electrodes, a flange is required to install the standard 4-inch chuck.

TOSHIN MACHINE TOOL CO.,LTD．

7 inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.

Kobayashi Kikai Co.,Ltd.

◆Chuck 6 inch three jaws◆Swing above bed: 320 ◆Swing above carriage: 160 ◆Swing above cut-off: None◆Center distance: 750-800 ◆Spindle through hole diameter: 35 ◆125-3000 rpm ◆8-point stopper_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆SOUL MS♯7 chuck (MAX 2200rpm) ◆Swing above bed: 360mm ◆Swing above carriage: 210mm ◆Center distance: 550mm ◆Spindle taper: MT No.5 ◆Spindle through hole diameter: φ40 ◆Bed (width x length): 275 x 1350 ◆Main motor: 3.7kw x 4P ◆Machine size: W1650 x D760 x H1140mm ◆Weight: 920kg *With scale (XYZ) _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆SOUL #7 3-jaw chuck◆Swing above bed: 360 ◆Swing above carriage: 180 ◆Center distance: 500 ◆Spindle taper hole: MT No.5 ◆Spindle through hole: 32mm ◆56-2500rpm ◆Bed width x length: 280 x 1350 ◆Machine size: W1700 x D1080 x H1190mm ◆Weight: 1200kg *Scale included_In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

[Video__ available. Check it out below! ] ◆7-inch 3-jaw hollow chuck ◆Center distance: 1000 ◆Swing above bed: 520mm ◆Rotation speed: 28-1350rpm ◆XYZ: 300×150×170 ◆Taper: MT No.5 ◆Bed width: 420 ◆Cut-off width (from face plate): 250 ◆Total bed length: 2205 ◆Spindle motor: 5.5kw 4P ◆Weight: 2570kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Swing above the bed: 435mm ◆Swing between 180mm from the face plate: 490mm ◆Swing above the cross feed table: 250mm ◆Distance from floor to spindle center: 1075mm ◆Distance from bed to spindle center: 215mm ◆Maximum distance between both centers: 850mm ◆Spindle nose: JIS A-6 ◆Spindle through hole: 52mm ◆Sleeve taper: MT6 ◆Center taper: MT4 ◆Spindle speed conversion number: 12 ◆Spindle rotation speed: 32-1800min ◆Lead screw: Φ31.75 T-shaped screw 4 teeth/inch or 6mm ◆Inch screw: 80-4 teeth/inch ◆Millimeter screw: 0.25-7mm ◆DP screw: 112-8 ◆Module screw: 0.5-3.5 ◆Cross feed table travel distance: 255mm ◆Double tool rest travel distance: 150mm ◆Maximum tool angle (X×Y): 25×25mm ◆Tailstock shaft travel distance: 150mm ◆Center taper: MT4 ◆Bed top width: 352mm ◆Total bed length: 1880mm ◆Spindle motor: 3.7_(5L) 4P ◆Coolant pump motor: 100W 2P ◆Weight: 1800W _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆KITAGAWA SK-7 Chuck_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆ Swing above bed: 460 ◆ Swing above cross feed table: 250 ◆ Center distance: 1000 ◆ Spindle through hole diameter: 52 ◆ MT No. 4 ◆ 25-1500 rpm ◆ Bed: W370 × D2170 × H340 mm ◆ Weight: 2000 kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Chuck: 300φ ◆Swing above bed: 460 ◆Swing above cross feed table: 250 ◆Distance between both centers: 800, 1000, 1500 ◆Bar stock machining diameter: 52 ◆Type of spindle end: A1-6 ◆Spindle through hole diameter: 53 ◆Spindle hole taper: No.6 ◆Number of speed changes: 12 ◆Speed range: 25 to 1500 ◆Bed: W2680×D370×Depth 340mm ◆Center distance: 1500 ◆Through hole: φ52 ◆MT No.6 ◆Motor capacity: 3.7kw ◆Machine dimensions: W3000×D1042×H1250mm ◆Weight: 2300kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆KITAGAWA JN07 3-jaw chuck◆Swing above bed: 360mm ◆Swing above carriage: 210mm ◆Maximum distance between centers: 550mm ◆Total bed length: 1360mm ◆Bed width: 275mm ◆Spindle taper: MT No.5 ◆Spindle hole diameter: 35mm ◆Weight: 800kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆KITAGAWA φ160 chuck (JN06RA5) ◆Through hole: φ45 ◆Swing above bed: 400 ◆Swing above carriage: 260 ◆Maximum distance between centers: 750 ◆Total bed length: 1700 ◆Bed width: 310 ◆Spindle speed: 63-1600rpm ◆Motor: 4P 3.7kw ◆Floor area: 850×2160 ◆Weight: 1400kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆ Collet chuck (mechanical feed) round material diameter: 38mm / (manual feed) 45mm ◆ Scroll chuck: outer diameter 220mm ◆ Power chuck: outer diameter 220mm ◆ Spindle through hole diameter: 57mm ◆ 80-2000rpm ◆ Swing above the bed: 490mm ◆ Width of the top of the bed: 250mm ◆ Required floor space (main body): 3100 x 1800mm ◆ Weight: 2000kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆3-jaw φ310 (12 inch) chuck ◆Swing above bed: 530 ◆Swing above carriage: 300 ◆Maximum distance between both centers: 2000 ◆Spindle through hole: 80mm ◆Spindle rotation speed: 15-1500rpm ◆MT No.5 ◆Maximum tool post travel: 155 ◆Maximum tailstock travel: 200 ◆Bed (width x length): 420 x 3570mm ◆Machine dimensions (length): 3975mm ◆Machine height: 1230mm _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko