◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Power supply: Matrix ◆Travel XYZ: 510×510×460 ◆Travel AC: +30°〜-120°,±360° ◆Distance from table top to spindle end: 190〜650mm (table surface) ◆Table work surface size: Φ500×W400 ◆Maximum workpiece dimensions: Φ500×405 ◆Maximum table load mass (evenly distributed): 300kg ◆Table top shape: 18mm T-slot × 5, 80 pitch ◆Spindle rotation speed: 12000min-1 ◆Spindle taper hole: 7/24 taper NO.40 ◆Spindle bearing inner diameter: Φ80 ◆Fast forward speed XYZ axis/A axis/C axis: 52000mm/min, 10min-1, 25min-1 ◆Cutting feed speed XYZ-axis/A-axis/C-axis: 1-52000mm/min, 1-10min-1, 1-25min-1 ◆Minimum index angle A-axis, C-axis: 0.0001 ◆Tool shank shape: BT-40 ◆Number of tools that can be stored: 30 ◆Maximum tool diameter/length/mass: Φ80mm/300mm/8kg ◆Maximum tool diameter when there are no adjacent tools: Φ125mm ◆Tool selection method: Address-fixed automatic shortcut method ◆Tool change time: 4.5 seconds ◆Spindle motor: (1 min/30 min/continuous rating): 26.4/22/15kw ◆Coolant motor: 0.230/0.365KW ◆Power supply: 36.6/44.5kVA (continuous/30 min) ◆Air pressure source: 360NL/min ◆Machine mass: 7500kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆XYZ:500×450×400 ◆Spindle rotation:14000rpm◆HSK-A63 ◆ATC:30 ◆Spindle in-machine measurement OMP60 ◆4-stage signal light ◆Tool measurement TT140 ◆Spindle coolant/air switching specification ◆Coolant gun ◆Spindle pulse handle ◆Tropical package (in-panel cooler) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆professional-5 (Super Gl, 4 control) ◆Table 〇500 (0.0001 indexing) ◆T-slot: 18mm ◆XYZ: 550×1000×500 ◆Rotation 50-20000rpm ◆Spindle: HSK-A63 ◆ATC: 60 ◆Through spindle (8.0MPa) *With scale feedback_In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆OSP-P200M-H 3D-D MC ◆XYZ: 762×460×460 ◆A-axis: +20 to -110 degrees ◆C-axis: 360 degrees ◆Fast forward speed: XY40 Z32m/min ◆Fast forward speed: A-axis 14400 degrees/min ◆Fast forward speed: C-axis 18000 degrees/min ◆Cutting feed speed: XYZ 32m/min ◆50 to 20000min-1 ◆Tool shank shape: HSK-A63 ◆Maximum tool length: 300 ◆Table: φ400 ◆Maximum workpiece dimensions: φ400×h400 ◆ATC: 48 ◆Required floor space: W2,160×D2,715 ◆Machine height: 2,950mm ◆Weight: 7,700kg ※No touch probe ※Oil controller ※Drum filter type chip conveyor ※Through spindle coolant (medium pressure type 1.5MPa) *Cutting fluid heating and cooling device *Mist collector *Spindle thermal displacement control TAS-S *Ambient thermal displacement control TAS-C *Absolute scale detection XYZ *Automatic tool length compensation Including breakage detection (touch sensor) *High class (simultaneous 5-axis control device) H specification *DNC coupling DNC-DT *Super-NURBS function Type-A (XYZAC) *Fixture offset *Showa Denki CRD-750R with filter *ATC tool length 300L specification *A/C axis swivel table: 0.001 degrees (with rotary inductosin) *C-axis table: φ400 T-slot 18h7 6 pieces_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆OSP-P200M for 3D-D MC◆XYZ: 762×460×460 ◆A-axis: +20 to -110 degrees◆C-axis: 360 degrees◆Fast forward speed: XY40 Z32m/min ◆Fast forward speed: A-axis 14400 degrees/min ◆Fast forward speed: C-axis 18000 degrees/min ◆Cutting feed speed: XYZ 32m/min ◆50 to 20000min-1 ◆Tool shank shape: HSK-A63 ◆Maximum tool length: 300 ◆Table: φ400 ◆Maximum workpiece dimensions: φ400×h400 ◆ATC: 48 ◆Required floor space: W2,160×D2,715mm ◆Machine height: 2,950mm ◆Weight: 7,700kg ※No touch probe※Oil controller※Drum filter type chip conveyor※Through spindle coolant (medium pressure type 1.5MPa) *Cutting fluid heating and cooling device *Mist collector *Spindle thermal displacement control TAS-S *Ambient thermal displacement control TAS-C *Absolute scale detection XYZ *Automatic tool length compensation Including breakage detection (touch sensor) *High class (simultaneous 5-axis control device) H specification *DNC coupling DNC-DT *Super-NURBS function Type-A (XYZAC) *Fixture offset *Showa Denki CRD-750R with filter *ATC tool length 300L specification *A/C axis swivel table: 0.001 degrees (with rotary inductosin) *C-axis table: φ400 T-slot 18h7 6 pieces_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆OSP-P200M-H for 3D-D MC◆XYZ:762×460×460 ◆A-axis:+20〜-110°◆C-axis:360°◆Fast forward speed (mold specification):XYZ 20m/min (mold) ◆Fast forward speed:A-axis 14400°/min ◆Fast forward speed:C-axis 18000°/min ◆Cutting feed speed (mold specification):XYZ 20m/min (mold) ◆50〜20000min-1 ◆HSK-A63 ◆Table:φ400 ◆ATC:48 ※No touch probe※Oil controller※Drum filter type chip conveyor※Through spindle coolant※Mist collector※Spindle thermal displacement control TAS-S ※Environmental thermal displacement control TAS-C ※Absolute scale detection (mold) XYZ axis※Automatic tool length compensation※High class (simultaneous 5-axis control device) H specification※DNC coupling DNC-DT *Super-NURBS function Type-A (XYZAC) *If there is a difference between the fixture offset specifications and the actual product, the actual product will take priority.

ShinMaywa Kiko

◆OSP-P200M-H ◆Spindle: BBT40 ◆15000min-1 ◆Pull stud JIS type (for through spindle) ◆ATC32 *In-machine chip disposal Coil type *Floor type chip conveyor *Bucket *Through spindle coolant: 1.5MPa *Shower cleaning device *Absolute scale XYZ *Automatic tool length compensation, automatic measurement (ONMP60) *Door interlock type? *OSP-P200M 3D-D *Super-NURBS Type A (XYZAC) *Anti-crash system *Touch probe available_If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆OSP-P300M-H ◆Spindle BBT40 ◆15000min-1 ◆Pull stat JIS type (for through spindle) ◆ATC32 *Chip conveyor (floor type) *In-machine chip disposal coil type *Through spindle coolant 1.5MPa *Shower cleaning device *Five tuning high spec *Absolute scale XYZ *Automatic tool length compensation automatic measurement (ONMP60) *Door interlock type? *OSP-P300M 3D-D *Touch probe available *Anti-crash system_If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆FANUC31i-MODEL B ◆XYZ: 1120×610×610 (high column) ◆Table work surface: 1300×610 ◆Maximum workpiece load: 1,200kg ◆Spindle rotation speed: 500-30000min-1 ◆Spindle taper: HSK-E40 (compatible with two-sided restraint tools) ◆Spindle bearing inner diameter: 45mm ◆ATC30 ◆Power supply: 31kVA ◆Machine body: 3,586×4,900×H2,984mm ◆Weight: 10,500kg

ShinMaywa Kiko

◆FANUC 180is-MB ◆XYZ:1120×610×460 ◆Table:1300×610 ◆HSK-A63 ◆ATC30 ◆12000rpm *Lift-up conveyor for aluminum *Signal lights 2 lights No buzzer *Mold processing NC kit NC option package A *Bluebe Eco Booster *HQ control *Data server *Tool length measurement included_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Control device: OKK FANUC Ai ◆Travel distance XYZ: 720 x 510 x 460 ◆Distance from table top to spindle end: 100-560 ◆Distance from column front to spindle center: 532 ◆Size of work surface (X-axis direction x Y-axis direction): 850 x 510 ◆Allowable workpiece mass: 800 kg ◆Shape of work surface (T-slot nominal dimension x spacing x number): T18 x 110 x 5 ◆Height from floor to table work surface: 850 ◆Rotation speed: 100-12000 min-1 ◆Spindle end: No. 40 ◆Bearing inner diameter: Φ65 ◆Pull stud (nominal number): MAS P40T-1 (45°) ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (with adjacent tools): Φ78 ◆Maximum tool diameter (without adjacent tools): Φ110 ◆Maximum tool length (from gauge line): 300 ◆Maximum tool mass: Maximum 8/average 5/total 100 ◆For cutting oil (coolant): 240L ◆Machine height: 2635cc ◆Required area (left/right x depth): 2855 x 3015 ◆Machine weight: 5.5T [Special accessories] ◆Signal light: 3-light type Alarm: Red light with buzzer ◆Coil conveyor: 2 internal coil conveyors on the left ◆Air blow device ◆Each axis has grease terminal installed._If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆FANUC Series 16iMB ◆XYZ: 700×400×330 ◆Table top surface to spindle end surface: 150-480 ◆Table working surface: 850×410 ◆Maximum table load capacity: 250kg ◆ATC: 21 ◆10000rpm ◆Machine dimensions: W2,115×D2,015×H2,236mm ◆Weight: 2100kg *Coolant tank included *Operating time: 28,390 hours_In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆FANUC 31i MODEL A5 ◆XYZ: 700×400×330 ◆ATC: 21 ◆24000rpm ◆Weight: 2100kg ※1 additional axis included ※Coolant tank included_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆FANUC 31i MODEL A5 ◆ATC: 21 ◆24000rpm ◆Weight: 2100kg ※1 additional axis included ※Coolant tank included_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko