72900 entries, 11441~11456 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Other compressor-related equipment | ANEST IWATA | SAT-400C-140 | 2008 |
Capacity: 400L, Pressure: 1.48MPa,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Compressor | ANEST IWATA | SAT-360-100 | 2011 |
36L 1.08MPa 1.62MPa The photo shows the tank in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Others | IWATA AIR COMPRESSOR MFG | SAT-33H-100 | Unknown |
33ℓ★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Other compressor-related equipment | ANEST IWATA | SAT-220B-120 | 1999 |
220L, 1.88MPa, 1.25MPa
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Other compressor-related equipment | ANEST IWATA | SAT-220B-120 | 2000 |
220L,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Compressor | ANEST IWATA | SAT-200-99 | 1985 |
200L Maximum operating pressure 11kg/cm2 Water pressure test pressure 17.3kg/cm2
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
AirTank | ANEST IWATA | SAT-1000B-80 | 1997 | Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details | |
|
Rotary | TSUDAKOMA | SAT 250X180 | Unknown |
With swivel, 250X180
|
Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details |
|
Tilt | 津田駒 | SAT |
Circular table diameter φ235 Square table 180×255mm 90° tilt 360° rotation Height (horizontal) 200mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Tilt | 津田駒 | SAT |
Table dimensions: 235mm, inclination angle 90 degrees
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Compressor | HOKUETSU INDUSTRIES (AIRMAN) | SASG19SD | 2013 |
Airman, 25 horsepower 18.5kw medium pressure specification, weight 540kg, elapsed time 24180 hours, maintenance inspection completed, oil filter element replacement, suction filter replacement, separator element replacement, separator O-ring replacement, full oil replacement
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Compressor | HOKUETSU INDUSTRIES (AIRMAN) | SAS8SD-6C | Unknown |
Completed maintenance, excellent condition, brand new, maximum pressure 0.83MPa, 60Hz,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Compressor | HOKUETSU INDUSTRIES (AIRMAN) | SAS4SD-6C | 2023 |
New, Screw compressor, Built-in air dryer
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Compressor | HOKUETSU INDUSTRIES (AIRMAN) | SAS4SD-6C | 2017 |
Excellent condition, serviced, 4610 hours of operation, built-in air dryer, screw compressor,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Compressor | HOKUETSU INDUSTRIES (AIRMAN) | SAS4SD-6C | Unknown |
◆Air volume: 0.44m3/min ◆Discharge pressure: 0.83Mpa ◆Capacity control method: Two-position control + ACCS + Purge control + Automatic start/stop ◆Lubricating oil volume: 2.5L ◆Discharge pipe diameter: 10A ◆Nominal output: 3.7kw ◆Frequency: 50Hz ◆Voltage: 200V ◆Starting direction: Direct input ◆Machine dimensions: W760×D510×H750 ◆Machine weight: 160kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Compressor | HOKUETSU INDUSTRIES (AIRMAN) | SAS11RD-6C | 2017 |
Built-in air dryer, screw compressor, maintenance and inspection parts replaced, oil, element and filter replaced, maximum pressure 0.83Mpa, 60Hz, operating time 12980 hours
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |