72828 entries, 8145~8160 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Others | MORI SEIKI | T00076B11 |
For external cutting, gripping width 50mm, hole pitch diameter 35×75mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T00076B11 |
For external cutting, gripping width 50mm, hole pitch diameter 35×75mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T00068B17 |
For external cutting, gripping width 50mm, hole pitch 35×75mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T00068B17 |
For external cutting. Grip width 50mm. Hole pitch 35 x 75mm. The photo shows a representative item.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T00068B17 |
For external cutting. Grip width 50mm. Hole pitch 35 x 75mm. The photo shows a representative item.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T00068 |
Maximum gripping width: 50mm External diameter holder Mounting hole pitch 35 x 76mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Taper | T0-1703 CK-65B | Unknown | Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details | ||
|
Taper | T0-1703 CK-50B | Unknown | Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details | ||
|
Taper | T0-1703 CK-40B | Unknown | Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details | ||
|
Microscope | 東京光学機械 | T.U.M.200-BD | Unknown |
★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Lathe | TSUGAMI | T-SPL1 | Unknown |
◆Chuck 6 inch three jaws◆Swing above bed: 320 ◆Swing above carriage: 160 ◆Swing above cut-off: None◆Center distance: 750-800 ◆Spindle through hole diameter: 35 ◆125-3000 rpm ◆8-point stopper_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Milling Cutter | T-Max S R131.9-32-12 | Unknown |
Outer diameter: φ32mm, length: 355mm★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
Lappers | TSUGAMI | T-LPM-600A | Unknown |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Internal Grinder | TSUGAMI | T-IGD150 | 1984 |
Spindle speed: 190, 310, 515, 850, 1400 rpm Maximum left/right movement of table: Manual 150 mm Automatic 80 mm Maximum table swivel angle: ±4.5° Automatic table feed speed (3 stages): 110-2700 mm/min Maximum forward/backward movement of grinding table: 30 mm Maximum grinding table swivel angle: ±90° ★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Others | T-DYNAMO T200SO | Unknown |
Operating pressure: 0.4 to 0.7 MPa Torque: 65 N・m Ambient temperature: -10 to 60℃ Pressure resistance: 1.05 MPa★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
Others | 巴バルブ | T-DYNAMO K30 | Unknown |
Operating pressure: 0.4~0.7MPa, Torque: 30N・m, Ambient temperature: -10~80℃, Pressure resistance: 1.05MPa, 2 others available SN: 12003D04005/12003D11060★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |