72674 entries, 69681~69696 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Dial Indicator | NIHON CALIPER | YC-1 | Unknown |
10~30
|
Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details |
|
Others | NCK（キャリパー） | YC-1 |
Measurement range: 10-30mm 0.01mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Dial Indicator | NIHON CALIPER | YC-11 | Unknown |
110-130
|
Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details |
|
TIG | Panasonic | YC-150TWX | 1996 |
It's a little old, so there are some scratches and stains, but it was used at a polishing shop and only occasionally, so it's in good condition due to low usage. I did a welding test and it worked well and can be used without any problems. The power supply is single-phase 200V, so it can be used even in places without a mains power source. Specifications: Rated input voltage: Single-phase 200V Rated input: 7.6KVA (5.5KW) Rated output current: DC 150A, AC 130A Rated usage rate: 40% Weight: 21kg Year of manufacture: 1996 Accessories: Air-cooled torch, gas meter, gas hose, base material cable, primary input cable (included with the unit), instruction manual
|
Osaka Prefecture |
Sinko Shoukai Ltd.
|
Details |
|
Welding | PANASONIC | YC-200BL2 |
Single-phase 200V
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Welding | PANASONIC | YC-200TRCT00 | 2011 |
Three-phase 200V 50/60Hz Welding 200A Cutting 60A Rated input 12.1KVA The photo shows the unit in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Welding | PANASONIC | YC-200TWSP-3 | 1973 |
Single phase 200V Rated input 17KVA 10KW 50/60Hz Rated output current AC200A DC200A Rated usage rate 80% Weight 135kg
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
TIG | PANASONIC | YC-300BP2 | 2006 |
Superb, Fully overhauled, Fully serviced, Operation check guaranteed, Digital inverter, Control type, AC/DC dual-purpose TIG welding machine, Air-cooled full set
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
TIG | PANASONIC | YC-300BP2 | 2006 |
Superb, digital inverter control type, AC/DC dual-purpose TIG welding machine, water-cooled full set, with water-cooled tank unit, YX-09KGC1, fully overhauled, fully serviced machine
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Welding | PANASONIC | YC-300WX2 | 1995 |
Three-phase 200V 50/60Hz Rated input 12KVA Rated output current 300A Rated output voltage 20V Usage rate 40%
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Welding | PANASONIC | YC-300WX3 | 2001 |
300A 3-phase 200/220V 10.5KVA, rated utilization rate 40%, weight 74kg
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
TIG | PANASONIC | YC-300WX4 | 2004 |
AC/DC dual-purpose TIG welding machine, water-cooled, maintenance and inspection completed, new regulator, new earth, new water-cooled hose, Panasonic genuine tank included, water-cooled tank type YX-09KDA1,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
TIG | YC-305TDK-7 | 1989 |
AC: 200V 28kVA 50Hz Rated load voltage: AC 22V DC 20V Rated output current: AC/DC 300A Maximum no-load voltage: AC 75V DC 106V Weight: 156kg
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
|
rolling machine | YIEH CHEN MACHINERY | YC-60A | 2006 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Insert Chip | コベルコ | YC-RMT10-YC15TF |
The photos shown are representative.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Insert Chip | コベルコ | YC-RMT10-YC15TF |
The photos shown are representative.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |