◆800φ chuck◆Swing over bed: 770 ◆Swing over carriage: 530 ◆Maximum distance between centers: 1525 ◆Spindle hole: American standard taper #450 ◆Spindle rotation speed: 12-1200 rpm ◆Maximum tool post travel: 250 ◆Bed (width x total length): 560 x 3226 mm ◆Machine (total width x total length): 1380 x 3643 mm ◆Machine weight: 4000 kg *With scale_In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆KITAGAWA JN07 3-jaw chuck◆Swing above bed: 360mm ◆Swing above carriage: 210mm ◆Maximum distance between centers: 550mm ◆Total bed length: 1360mm ◆Bed width: 275mm ◆Spindle taper: MT No.5 ◆Spindle hole diameter: 35mm ◆Weight: 800kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Swing above the bed: 435mm ◆Swing between 180mm from the face plate: 490mm ◆Swing above the cross feed table: 250mm ◆Distance from floor to spindle center: 1075mm ◆Distance from bed to spindle center: 215mm ◆Maximum distance between both centers: 850mm ◆Spindle nose: JIS A-6 ◆Spindle through hole: 52mm ◆Sleeve taper: MT6 ◆Center taper: MT4 ◆Spindle speed conversion number: 12 ◆Spindle rotation speed: 32-1800min ◆Lead screw: Φ31.75 T-shaped screw 4 teeth/inch or 6mm ◆Inch screw: 80-4 teeth/inch ◆Millimeter screw: 0.25-7mm ◆DP screw: 112-8 ◆Module screw: 0.5-3.5 ◆Cross feed table travel distance: 255mm ◆Double tool rest travel distance: 150mm ◆Maximum tool angle (X×Y): 25×25mm ◆Tailstock shaft travel distance: 150mm ◆Center taper: MT4 ◆Bed top width: 352mm ◆Total bed length: 1880mm ◆Spindle motor: 3.7_(5L) 4P ◆Coolant pump motor: 100W 2P ◆Weight: 1800W _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

[Video__ available. Check it out below! ] ◆7-inch 3-jaw hollow chuck ◆Center distance: 1000 ◆Swing above bed: 520mm ◆Rotation speed: 28-1350rpm ◆XYZ: 300×150×170 ◆Taper: MT No.5 ◆Bed width: 420 ◆Cut-off width (from face plate): 250 ◆Total bed length: 2205 ◆Spindle motor: 5.5kw 4P ◆Weight: 2570kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Chuck 6 inch three jaws◆Swing above bed: 320 ◆Swing above carriage: 160 ◆Swing above cut-off: None◆Center distance: 750-800 ◆Spindle through hole diameter: 35 ◆125-3000 rpm ◆8-point stopper_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

If there is any discrepancy between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

ShinMaywa Kiko

If there is a discrepancy between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆23Ω ◆SWING: 430Ω ◆SPINDLE STROKE: 125Ω ◆(50Hz) 360-2400rpm/(60Hz) 430-2800rpm *200V specification_If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆200V specifications_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆200V ◆SWING:350mm ◆CAPACITY:13mm ◆STROKE:80mm ◆Table:Square 250×250/Round 270mm ◆SPEED(50/60Hz):500-2500/600-3000rpm ◆Column diameter:80mm ◆Installation area:306×496mm ◆Machine height:980mm ◆Weight:75kg *Only one draw lever. In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆200V ◆Swing: 350mm ◆CAPACITY: 13mm ◆Table: (Square) 250×250/(Round) 270m/m ◆Stroke: 80mm ◆(50/60Hz): 500-2500/600-3000rpm ◆Installation area: 306×495mm ◆Machine height: 980mm ◆Weight: 75kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆100V ◆Swing: 350mm ◆CAPACITY: 13mm ◆Stroke: 80mm ◆Table up and down movement: 300mm ◆Table area: Square 250×250/Round 270φ ◆(50/60Hz): 500-2500/600-3000rpm ◆Motor: 200W ◆Machine dimensions: 306×496×H980mm ◆Weight: 75kg *No chuck handle_In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆13mm ◆Swing: 350m/m ◆Stroke: 80m/m ◆Rotation speed (50Hz) 500, 900, 1500, 2500rpm (60Hz) 500, 1080, 1800, 3000rpm *100V specification *Tap is not included, so only a drill can be used._If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆MAX 19mm ◆Spindle (50/60Hz) 165-2075 / 190-2490rpm *200V specification_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆13cm ◆200V specification◆Dimensions: W510×D560×H1480cm ◆Weight: 75kg *If there are any differences between the stand-mounted specifications in the photo and the actual product, the actual product will take precedence.

ShinMaywa Kiko