72242 entries, 64113~64128 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Lathe | MORI SEIKI | MR-1000G | Unknown |
[Video__ available. Check it out below! ] ◆7-inch 3-jaw hollow chuck ◆Center distance: 1000 ◆Swing above bed: 520mm ◆Rotation speed: 28-1350rpm ◆XYZ: 300×150×170 ◆Taper: MT No.5 ◆Bed width: 420 ◆Cut-off width (from face plate): 250 ◆Total bed length: 2205 ◆Spindle motor: 5.5kw 4P ◆Weight: 2570kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | TSUGAMI | T-SPL1 | Unknown |
◆Chuck 6 inch three jaws◆Swing above bed: 320 ◆Swing above carriage: 160 ◆Swing above cut-off: None◆Center distance: 750-800 ◆Spindle through hole diameter: 35 ◆125-3000 rpm ◆8-point stopper_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | HIKOKI | BD-3602 | Unknown |
◆Swing: 360mm ◆Spindle stroke: 80mm ◆(50/60Hz) 550-2500/660-3000rpm _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | 北川 | KBD-16 | Unknown | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
Desktop Drilling Machine | 北川 | KDS-410 | Unknown |
◆ Spindle: MT2 ◆ Table 270 square ◆ 200V ◆ Swing: 410 ◆ Spindle up and down movement: 100° ◆ Between spindle tables: 530° ◆ Between spindle bases: 701° ◆ Dimensions: W357×D705×H1197° ◆ Weight: 98kg *200V specification_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | 北川 | KBD-410 | Unknown |
◆16Ω ◆400W ◆4Poles(16mm)/6Poles(19mm) *200V specification_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | トップスター | TOP-190 | Unknown |
◆200V specifications_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | 遠州 | ESD-350S | Unknown |
◆200V ◆SWING:350mm ◆CAPACITY:13mm ◆STROKE:80mm ◆Table:Square 250×250/Round 270mm ◆SPEED(50/60Hz):500-2500/600-3000rpm ◆Column diameter:80mm ◆Installation area:306×496mm ◆Machine height:980mm ◆Weight:75kg *Only one draw lever. In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | 遠州 | ESD-350S | Unknown |
◆200V ◆Swing: 350mm ◆CAPACITY: 13mm ◆Table: (Square) 250×250/(Round) 270m/m ◆Stroke: 80mm ◆(50/60Hz): 500-2500/600-3000rpm ◆Installation area: 306×495mm ◆Machine height: 980mm ◆Weight: 75kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | 遠州 | ESD-350S | Unknown |
◆100V ◆Swing: 350mm ◆CAPACITY: 13mm ◆Stroke: 80mm ◆Table up and down movement: 300mm ◆Table area: Square 250×250/Round 270φ ◆(50/60Hz): 500-2500/600-3000rpm ◆Motor: 200W ◆Machine dimensions: 306×496×H980mm ◆Weight: 75kg *No chuck handle_In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | 遠州 | ESD-350S | Unknown |
◆13mm ◆Swing: 350m/m ◆Stroke: 80m/m ◆Rotation speed (50Hz) 500, 900, 1500, 2500rpm (60Hz) 500, 1080, 1800, 3000rpm *100V specification *Tap is not included, so only a drill can be used._If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | OKS | RDM-200A | Unknown |
◆MAX 19mm ◆Spindle (50/60Hz) 165-2075 / 190-2490rpm *200V specification_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | ENSHU INDUSTRIAL | EST350N | Unknown |
◆13cm ◆200V specification◆Dimensions: W510×D560×H1480cm ◆Weight: 75kg *If there are any differences between the stand-mounted specifications in the photo and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | HITACHI | B13Y | Unknown |
If there is any discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | HITACHI | NPA11-3 | Unknown |
◆100V ◆(50/60Hz) 500-2000/600-2400rpm *No chuck handle_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
|
Vice | 津田駒 | Unknown |
If there is any discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |