72751 entries, 4625~4640 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Vice | TAG | YVS-125 |
Mouth width 85mm Height 40mm Opening 120mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | TOPCON | RH-100A |
Barrel capacity: 100L Barrel tank internal dimensions: 504 x 474mm Weight: 250kg The photo shows the product in an uncleaned state.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Desktop Drilling Machine | ブラザー | BT1-215 |
Tapping capacity: M3-M8, 3-phase 200V, spindle speed: 420/1340-500/1600 (50/60Hz), table size: 225 x 230mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Desktop Drilling Machine | ブラザー | BT8-332 |
Capacity M10-M30, Maximum spindle stroke 65mm, Three-phase 200V 50/60Hz, Spindle speed 60/70-240/280rpm, Weight 118kg
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Hydraulic Press | FUJIKIKO | RSP-3030P | 2002 |
30t Stroke 75 Gap 300 *Desk rotary specification
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
|
Other | FUJIKIKO | SSP-1540K |
15t Bolster dimensions 500 x 300
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
|
Compressor | HITACHI | PBD-2.2XB5 |
Capacity: 3 horsepower (2.2kw) Three-phase 200V 50Hz Maximum pressure: 0.93MPa Discharge air volume: 265L/min Operating time: 1460h The photo shows a representative product.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
NC Multi-tasking Machine | MORI SEIKI | NL2500MC/1250 | 2007 |
MSX-850Ⅲ 12-inch 3-jaw chuck, 12-sided turret, with center, tool presetter, and right-side chip cap
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | 滝沢 | TSL-550 | 1991 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | 滝沢 | TSL-550 | 1991 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | 滝沢 | TSL-550 | 1991 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | 滝沢 | TSL-550D |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Lathe | 滝沢 | TSL-550D | 1994 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | 滝沢 | TSL-550D | 1994 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | 滝沢 | TSL-550D | 1994 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | 滝沢 | TSL-550D | 1994 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |