FANUC21-M BT30 ATC12 Table size 610 x 380 Maximum spindle speed 8000 Stroke X500 Y330 Z250

◆Table size: 380 x 1600 mm ◆XYZ: 1000 x 420 x 400 ◆Spindle tip: No. 50 ◆Rotation speed: 45~1400 min-1 ◆Maximum load on table: 700 mm ◆Machine size: W2370 x D2265 x H1830 ◆Weight: 3910 mm *With XYZ digital_If there is a difference between the specifications and the actual product, the actual product will take precedence.

[__Video available. Please check it from the video button at the bottom.] ◆FANUC18M ◆3-axis ◆Processing capacity: Hole diameter φ4-24 ◆Drilling depth: MAX 1200mm ◆Spindle speed: 520-5250rpm ◆Table size: 1000×1500mm ◆Table load capacity: 2000kg ◆Left-right stroke: 780mm ◆Up-down stroke: 480mm ◆Hardness up to HRC-40 possible ◆Motor: 14.5kw ◆Required floor space: 5900×3400mm ◆Weight 9t _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ProfessionalJ NT40 Table size 1050 x 400 Spindle speed 15-4000 rpm Stroke X710 Y400 Z360

Chuck size: 800x400mm Table movement (left/right x front/back): 950x440mm Grindstone size (outer diameter (50/60Hz) x width x inner diameter): φ355/305x38xφ127 Grindstone rotation speed: 1500/1800rpm (50/60Hz)★

Chuck size 315 x 110 with left and right feed and 2-axis digital scale

Automatic left/right, automatic cutting, rotation speed: 2940/3530rpm (50/60Hz), grinding wheel diameter: Φ205x6-32xΦ31.75 (inner diameter), table: 380x120 (tilting chuck ±90 degrees), wet type★

○Projector Screen effective diameter φ500 mm Rotating type○Lens Projection lens 20x, 10x 1 pair each○Stage XY measurement range 100×50 mm Top surface dimensions 300×240 mm Plate glass 180×150 mm Maximum load 10 kg Workpiece height 181 mm○Digital XY position display counter Minimum display amount 0.001 mm Rotating screen Angle display device○Lighting 24V 150W (halogen) with oblique reflection lighting device○Dimensions Dimensions: Width 620 × Depth 1073 × Height 1627 mm Weight: 190kg○Code No. 304-201-1

○Digital XY 2-axis display device○Table Working surface 1100mm x 250mm T-slot Width 14mm x 3○Spindle Spindle taper NT40 Spindle speed 130-2200rpm Gear 8-stage Spindle motor 1.5kw Spindle head rotation Left and right ±45 degrees○Axis travel X-axis 550mm Left and right - table Y-axis 250mm Front and back - saddle Z-axis 350mm Up and down - knee Spindle quill Diameter 120mm Feed 80mm Overram front and back movement 300mm Spindle end to table top 105-555mm *High column 100mm Spindle center to column front 125-425mm○Machine size Dimensions: Width 1640 x Depth 1835 x Height 2050 mm *High column 100mm Installation width 2190mm Weight: 1550 Kg○Accessories Tsudakoma VR-200 Precision Machine Vise 1pc BIG High Power Milling Chuck Set○Features/Operation Method 100mm column up specification Quill automatic cutting feed/feed out possible Table left/right automatic feed, table up/down fast forward device

[Video available. Please see below!] ◆FANUC-18T ◆18-inch hydraulic chuck (solid) ◆Spindle through hole φ320 ◆Swing above bed: φ1050 ◆Swing of carriage: 900 ◆Center distance: 1500 ◆Support weight between both centers: 6000kg ◆XZ: 510×1500 ◆2〜500min-1 ◆V12 ※No pressure cup

Motion range: X-axis 350mm, Y-axis 250mm, Z-axis 300mm, Spindle end type: JIS No. 30, Spindle speed: 100-10000?@?1, Table: 600x250, T-slot: 14H8x3x63 pitch, Control: FANUC 16M C (display replaced with new one), Total power capacity: 14.9KVA, ,

Fanuc-Power Mate, T:900*400

Chuck diameter: 1200x500mm Left and right maximum stroke: 1450mm Front and back maximum stroke: 560mm Grindstone diameter: 510x50x127 (outer diameter x width x inner diameter), spindle inverter★

Chuck size 800 x 400 With magnet separator Cutting tank Fully automatic with automatic cutting

With magnetic separator, upper dresser, 230mm scroll chuck, , If there is a difference between the contents and the actual product, the actual product will take precedence. , [Online tour available]