71473 entries, 45537~45552 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Others | FUJI ELECTRIC | OPC-G9S-AIO | 1996 |
For FRENIC5000G9S
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Others | FUTABA | NCR100A | 1996 |
Material width: 10~100mm, Material thickness: 0.1~1.6mm, Feed length: 1~2999.99mm, Motor output: 0.4kw, Power supply: Single phase 200V, Air pressure: 0.2~0.4MPa, Machine weight: 40kg★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
TIG | DAIHEN | AVP-300Ｐ(S-3) | 1996 |
- Rated input voltage: Three-phase 200/200V - Rated input current: 32/29A - Rated frequency: 50/60Hz - Rated output current: 300A - Output current range: (AC TIG) 10-100A, (DC TIG) 4-300A, (Manual welding) 10-250A - Weight: 56Kg ★
|
Kumamoto Prefecture |
TokyoEngineering
|
Details |
|
NC Lathe | Nakamura-Tome | TMC-30C | 1996 |
FANUC Four-sided chuck (Koyo/HSR-225) 12-sided turret
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PFG-500DX | 1996 | - |
KOWA MACHINERY CO.,LTD
|
Details | |
|
Horizontal Machining Center | MAZAK | HTC-400 | 1996 |
T:400*400, 1° cutting, 10000rpm
|
Aichi prefecture |
Kinoshita Machinery Co., Ltd.
|
Details |
|
Turret Punch Press | AMADA | ARIES-224Ai | 1996 |
Pressure capacity 20t, Auto index, Instruction manual included, Many molds available, Overhauled 2 years ago, H type, Number of stations 20, ,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Hoist | KITO | H2SL020L06?1 | 1996 |
KITO, hoist, lifting height 6m, low head type, load capacity 2t, east-west-north-south up-down 6-point push button,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Hoist | KITO | H2SL020L06?1 | 1996 |
2.0t hoist, lifting height 6m, suspended type, 6-point push button, low head type, east-west-north-south up-down,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Forming Grinder | KURODA SEIKO | GS-BMH | 1996 |
Chuck size 380 x 110 With left and right feed With up and down fast feed With front and rear digital scale
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Forming Grinder | AMADA WASHINO | SG-45FII | 1996 |
★
|
Yamanashi Prefecture |
TokyoEngineering
|
Details |
|
NC Surface Grinder | 岡本工作 | PSG-64EX | 1996 |
★Test cut was carried out! (Photos are now available)
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Band Saw | NICOTEC | SCH-25SA | 1996 | Chiba Prefecture |
EndoKikaiKogyo.INC
|
Details | |
|
Press Brake/Bender | AMADA | RG-100S | 1996 |
100t Stroke length 100 Table length 2500 Gap depth 400 Open height 370 Auto back gauge Machine weight 6.0t
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | AIDA ENGINEERING | NC1-60(2) | 1996 |
Stroke speed: 45~85spm Stroke length: 140mm Slide adjustment: 70mm Die height: 300mm #10206-8554
|
Shizuoka Prefecture |
OTA YOSHIO MACHINE INDUSTRY CO.,LTD
|
Details |
|
TIG | Panasonic | YC-150TWX | 1996 |
It's a little old, so there are some scratches and stains, but it was used at a polishing shop and only occasionally, so it's in good condition due to low usage. I did a welding test and it worked well and can be used without any problems. The power supply is single-phase 200V, so it can be used even in places without a mains power source. Specifications: Rated input voltage: Single-phase 200V Rated input: 7.6KVA (5.5KW) Rated output current: DC 150A, AC 130A Rated usage rate: 40% Weight: 21kg Year of manufacture: 1996 Accessories: Air-cooled torch, gas meter, gas hose, base material cable, primary input cable (included with the unit), instruction manual
|
Osaka Prefecture |
Sinko Shoukai Ltd.
|
Details |