71526 entries, 44289~44304 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Radial Drilling Machine | トミナガ | TRE-2500 | 1974 |
◆Maximum drilling radius: 2775 ◆Maximum distance between column sleeve and spindle center: 2515 ◆Minimum distance between column sleeve and spindle center: 415 ◆Column sleeve diameter: 520 ◆Spindle taper: MT No.5 ◆Spindle vertical movement distance: 400 ◆Arm vertical movement distance: 860 ◆Spindle head left and right movement distance: 2100 ◆Spindle rotation speed: 20 to 1658 ◆Square table dimensions (width x length x height): 750 x 500 x 450 ◆Base dimensions (W x D x H): 3630 x 1260 x 300 ◆Base work surface: 2645 x 1250 ◆Spindle motor: 7.5kw ◆Drilling capacity: (cast iron) 85 (copper) 70 ◆Tapping capacity: (cast iron) 70 (copper) 60 ◆Bore capacity: (cast iron) 300 (copper) 220 ◆Machine dimensions: 3630 x H3150 x 1260 ◆ Total weight: Approximately 11,600 kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Tool Grinder | MURAHASHI (GREAT CAPTAIN) | CG-7 | 1974 |
◆Table swing: 260mm ◆Center distance: 400mm ◆Table front/back left/right: 250 x 200 ◆Table rotation angle: 5 degrees left/right ◆Grinding wheel shaft diameter: 31.75φ ◆Grinding wheel diameter: 150D x 31.75d x 13W ◆Size: 540 x 660mm ◆Weight: 260kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Tool Grinder | FUJITA WORKS | DG-36A | 1974 |
◆ Grinding wheel diameter: 150mm ◆ Grinding wheel hole diameter: 63.5mm ◆ Grinding wheel thickness: 50mm ◆ Maximum operating circumferential speed: 1700m/min ◆ No-load rotation speed: 3000/3600rpm (50/60Hz) ◆ Machine dimensions: 500×460×H1230mm ◆ Weight: Approximately 190kg _In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Horizontal Milling Machine | HOWA SANGYO | STM-2H | 1974 |
X710 Y300 Z410, T1350X310, 12~1800rpm, NT50
|
Osaka | Kei-Machine Co.,Ltd. | Details |
|
Rotary | NIKKEN KOSAKUSHO WORKS | NST-300HP | 1974 |
φ300
|
Osaka Prefecture | Kei-Machine Co.,Ltd. | Details |
|
Others | 面取り機 | 1974 |
★
|
Ibaraki Prefecture, | TokyoEngineering | Details | |
|
Others | HITACHI | GBT5 | 1974 |
Rotation speed: 3000 rpm, Grindstone diameter: φ205 x 19 x φ15.88 (inner diameter) ★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Desktop Lathe | 江黒 | LB8-4B | 1974 |
Three-phase 200V core 200mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Compressor | 岩田塗装工業 | SU-07N | 1974 |
Motor: 0.75kw, Tank capacity: 65ℓ★Input: 100V
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Others | IMV | VM-3314 | 1974 |
★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Arc | 大阪電気 | BC | 1974 |
・Rated primary input: 9.5KVA, 7KW ・Rated primary voltage: 200V ・Frequency: 60Hz ・Rated secondary current: 180A ・Capacitor capacity: 3.8KVA ・Capacitor voltage: 500V★
|
Kumamoto Prefecture | TokyoEngineering | Details |
|
Chain-Block / Lever block | ENDO KOGYO | EK | 1975 |
Capacity: 40~50kg★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Others | 大富士電機産業 | IGC | 1975 |
200V, Maximum current: 4800A, Continuous current: 300A★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Horizontal Milling Machine | HOWA SANGYO | STRONG-1H | 1975 |
NT50, digital 3-axis (Y-axis out of order)
|
Chiba Prefecture | KA Machine Co., Ltd. | Details |
|
Band Saw | AMADA | H-450H | 1975 | Ibaraki Prefecture | TokyoEngineering | Details | |
|
Others | TOKYO SEIMITSU | S-LM-IV75B | 1975 |
★
|
Yamanashi Prefecture | TokyoEngineering | Details |