・Actual exhaust speed (at atmospheric pressure): 1,080 L/min at 50 Hz, 1,300 L/min at 60 Hz ・Pressure during continuous operation: 2 x 103 Pa (15 Torr) or less ・Motor: AC200V3φ4P 2.2 kW flange motor ・Intake/exhaust port: VG50/VF50 equivalent ・Weight: Approximately 87 kg (including motor)

TokyoEngineering

The photos are representative ones.

Kobayashi Kikai Co.,Ltd.

If there is a discrepancy between the content and the actual product, the actual product will take precedence. , [Online tour available] , *Prices/inventory quantities are listed in the machine link URL below.

EndoKikaiKogyo.INC

If there is a discrepancy between the content and the actual product, the actual product will take precedence. , [Online tour available] , *Prices/inventory quantities are listed in the machine link URL below.

EndoKikaiKogyo.INC

If there is a discrepancy between the content and the actual product, the actual product will take precedence. , [Online tour available] , *Prices/inventory quantities are listed in the machine link URL below.

EndoKikaiKogyo.INC

#894558

Kinoshita Machinery Co., Ltd.

◆Rated voltage: 200V ◆Grinding wheel rotation direction: forward and reverse ◆No-load rotation speed: 50/60Hz: 3000/3600rpm ◆Grinding wheel dimensions: 100φ×34×17φ (cup type with flange) 100φ×13×12.7φ (dish type with flange) ◆End mill grinding range: 6-40mm ◆Maximum end mill blade length: 200mm ◆Ball end mill grinding total length: 210mm ◆Maximum diameter of grinding wheel: 150φ ◆Maximum operating peripheral speed: 2000m/min ◆Machine dimensions: 840×700×H1250mm ◆Weight: 400kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

○NC unit TOYOPUC Touch Minimum setting unit 0.0001mm Interactive type to input values according to the grinding pattern Grinding wheel dressing is also easy to operate with NC dialogue Plunge, traverse, contour grinding Taper grinding possible with NC dressing ○Capacity / capacity Table swing φ200mm Center distance 250mm Grinding outer diameter φ60mm Workpiece weight 20kg ○Grinding wheel Grinding wheel dimensions Outer diameter φ355 x width 15-38 x inner diameter φ127mm Maximum operating peripheral speed 33 m/s ○Grinding wheel head Minimum setting unit φ0.0001mm ○Table Swivel angle = 12.5° to -0.5° Minimum setting unit φ0.0001mm ○Workpiece headstock Swivel type Stepless speed change [Fixed shaft rotating shaft combined headstock] Shank hole MT,2 Rotation speed 21-1000rpm ○Tailstock Manual type Shank hole MT, 2○Motor for grinding wheel spindle 2.2kw 4P○Tank, etc. Coolant tank 200L Hydraulic tank 20L Mag separator, paper filter device Mist collector device○Machine size Floor surface width 3800 x depth 2200 Weight 4000kg

TOSHIN MACHINE TOOL CO.,LTD．

★

TokyoEngineering

Table swing 320, center distance 1000, grinding stone size: 405 x 75 x 127, stroke: X288 Z1280, with sizing device

Kobayashi Kikai Co.,Ltd.

40~200N.m

Kei-Machine Co.,Ltd.

GW15

Kobayashi Kikai Co.,Ltd.

OSP-P200L 8-inch 3-jaw hollow chuck (Kitagawa/B208) 12-sided compound turret with Y axis, center, tool presetter, right-hand chip conveyor, advanced easy dialogue

Kobayashi Kikai Co.,Ltd.

Controller : OSP-P300M Table size: 1,000 x 460 mm Maximum load capacity: 700 kg Travel : X: 762 mm, Y: 460 mm, Z: 460 mm Distance between table and spindle nose : 150～610 mm 　　　　　 Spindle taper: BT40 (MAS-I) Spindle speed : 50～15,000 rpm ATC : 20 stations Required Floor space : 2,210 x 2,810 mm Machine height : 2,746 mm Machine weight : 6,300 kg Two internal coil conveyors (left and right, rear-mounted) 　　　　　 Cutting oil system (no chip conveyor) Cutting fluid cooling system (separate) 　　　　　 One-way positioning OSP suite Helical cutting Arbitrary angle chamfering

AK TECHNOS CO., LTD.

Intex, Inc.

○NC unit OSP-P300MA○Table Working surface size 1300mm x 560mm Maximum load mass 900kg○Travel amount X-axis 1050mm Y-axis 560mm Z-axis 460mm○Spindle BT40 Spindle speed 12000rpm ATC20 Motor AC11/7.5kw○Machine size Dimensions Width 2564mm x Depth 3194mm x Height 2746mm Weight 7700kg

TOSHIN MACHINE TOOL CO.,LTD．