◆OSP-P300M-H ◆Spindle BBT40 ◆15000min-1 ◆Pull stat JIS type (for through spindle) ◆ATC32 *Chip conveyor (floor type) *In-machine chip disposal coil type *Through spindle coolant 1.5MPa *Shower cleaning device *Five tuning high spec *Absolute scale XYZ *Automatic tool length compensation automatic measurement (ONMP60) *Door interlock type? *OSP-P300M 3D-D *Touch probe available *Anti-crash system_If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆MAZATROL smart ◆KITAGAWA B210 (10 inch) chuck ◆Center distance: 500 ◆Maximum swing: φ660 ◆Standard machining diameter: φ255 ◆Maximum machining diameter: φ380 ◆35-4000 min-1 ◆Spindle through hole: φ91 ◆Motor output: 18.5/15kw ◆MT No.5 ◆V12 ◆Power capacity: 28.7/33.8kVA ◆Machine dimensions: W1,680×D2,630×H1,700mm ◆Weight: 4,800kg *Without chip conveyor_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Control device: OKK FANUC Ai ◆Travel distance XYZ: 720 x 510 x 460 ◆Distance from table top to spindle end: 100-560 ◆Distance from column front to spindle center: 532 ◆Size of work surface (X-axis direction x Y-axis direction): 850 x 510 ◆Allowable workpiece mass: 800 kg ◆Shape of work surface (T-slot nominal dimension x spacing x number): T18 x 110 x 5 ◆Height from floor to table work surface: 850 ◆Rotation speed: 100-12000 min-1 ◆Spindle end: No. 40 ◆Bearing inner diameter: Φ65 ◆Pull stud (nominal number): MAS P40T-1 (45°) ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (with adjacent tools): Φ78 ◆Maximum tool diameter (without adjacent tools): Φ110 ◆Maximum tool length (from gauge line): 300 ◆Maximum tool mass: Maximum 8/average 5/total 100 ◆For cutting oil (coolant): 240L ◆Machine height: 2635cc ◆Required area (left/right x depth): 2855 x 3015 ◆Machine weight: 5.5T [Special accessories] ◆Signal light: 3-light type Alarm: Red light with buzzer ◆Coil conveyor: 2 internal coil conveyors on the left ◆Air blow device ◆Each axis has grease terminal installed._If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

Kobayashi Kikai Co.,Ltd.

Kobayashi Kikai Co.,Ltd.

SIEMENS 24,000min-1 ATC-25 BBT30★

TokyoEngineering

FANUC31i-B5 BBT30 ATC 14-piece set, Table size 650 x 400, Spindle speed 10000 rpm, Stroke: X500 Y400 Z330, Tool length measurement included, High torque specification.

Kobayashi Kikai Co.,Ltd.

TOSHIN MACHINE TOOL CO.,LTD．

ERGO line (MELDAS) 500mm square, 2 pallets, BBT40, spindle speed 15000rpm, ATC 60, stroke X730 Y730 Z880, 1-degree indexing, rear-dispensing chip conveyor.

Kobayashi Kikai Co.,Ltd.

SINUMERIK (S840DEsl) BBT30 ATC25 pieces Table size 840 x 420 Spindle speed 10000 rpm Cutting tank Rear-mounted chip connector Tool length measurement Touch sensor

Kobayashi Kikai Co.,Ltd.

OSP-P300M BT50 ATC20 pieces Table size 1050 x 460 Spindle speed 6000 rpm Stroke X820 Y460 Z450 With center through (1.5Mpa) With internal spiral conveyor

Kobayashi Kikai Co.,Ltd.

AK TECHNOS CO., LTD.

Spindle chuck Kitagawa/JN12T Maximum machining diameter 200 Maximum machining length 200 Center distance 1450 Table swing 550

Kobayashi Kikai Co.,Ltd.

mazak FZ BT30 ATC14 pieces Table size 600 x 400 Spindle speed 12000 rpm Stroke X600 Y400 Z350

Kobayashi Kikai Co.,Ltd.

Fs31i-MODEL B, ATC30, table 1550×760, X1540 Y760 Z660, rotation speed 200～20000min-1, 7/24 taper No.40, external dimensions 4100×3400×3400H, weight 13000kg★

TokyoEngineering

M730BM, energization time 610 hours, maximum machining diameter 400 mm, center distance 685 mm, 10-inch hollow chuck, milling

 KA Machine Co., Ltd.