71442 entries, 32529~32544 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Tool Grinder | DIAPET | DP-520 |
Three-phase 200V 50/60Hz No-load speed: 2650/3100-3300/4000rpm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | TECLOCK | DP-501 |
Measurement range: 0-360 degrees Minimum reading 5' Blade length 250mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | TECLOCK | DP-501 |
Measurement range: 0-360 degrees Minimum reading 5' Blade length 250mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | TECLOCK | DP-500 |
Display: Dial type
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Protector | テクロック | DP-500 | Unknown | Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details | |
|
Others | ヤマト科学 | DP-41 | 1989 |
Single-phase AC200V Internal dimensions: 450x450x450mm
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Tool Grinder | ITO SEISAKUSHO | DP-3N | Unknown |
Capacity: Table swing φ200mm Headstock taper hole NT40 Distance from headstock center to table surface 120mm Table Working area 145mm×620mm Left/right stroke 270mm Front/back stroke 190mm Grindstone spindle head Up/down stroke 170mm Horizontal rotation 130° Front/back tilt ±20° Grindstone spindle speed [50/60Hz] 2650, 3300rpm/3100, 4000rpm Grindstone spindle motor 0.2kw Machine size: Floor area 850mm×1000mm Weight 300kg
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
Tool Grinder | AMADA | DP-32 | 1989 |
◆Drill diameter that can be ground: 3 to 32mm ◆Tip angle: 80° to 180° ◆Grinding wheel: 180×25×25.4 max 2000r/m ◆200V 3 phase ◆50/60Hz ◆MOTOR: 0.4kw ◆Weight: 145kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Others | DP-3001P | Unknown |
100V, operating range: 1-31kg, minimum display amount: 10g, table dimensions: 340x520★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Tool Grinder | ITO SEISAKUSHO | DP-3 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | ||
|
Tool Grinder | ITO SEISAKUSHO | DP-2NS | Unknown |
Motor: 400W 2P Main table: 340x180mm Sub table: 340x150mm ★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Tool Grinder | ITO SEISAKUSHO | DP-2N |
Three-phase 200V 50/60Hz 2845/3425rpm ﾄｲｼ125×38×65mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | Mitutoyo | DP-2(264-510) |
In good condition Size 126 x 245 x 63 mm Cable and spare recording paper included
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | Mitutoyo | DP-2（264-510） | Unknown |
★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Tool Grinder | 伊藤 | DP-2 | Unknown |
★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Others | Mitutoyo | DP-1VR（264-504） | Unknown |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |