71526 entries, 28513~28528 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Torque | 京都機械工具 | GEK200-R4 | Unknown |
40~200N.m
|
Osaka Prefecture | Kei-Machine Co.,Ltd. | Details |
|
NC Cylindrical Grinder | JTEKT | GE4Pi-100 | 2017 |
Table swing 320, center distance 1000, grinding stone size: 405 x 75 x 127, stroke: X288 Z1280, with sizing device
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
NC Cylindrical Grinder | TOYODA MACHINE WORKS | GE4P-150 | 2002 |
★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
NC Cylindrical Grinder | TOYODA MACHINE WORKS | GE3Pi-25 | 2020 |
○NC unit TOYOPUC Touch Minimum setting unit 0.0001mm Interactive type to input values according to the grinding pattern Grinding wheel dressing is also easy to operate with NC dialogue Plunge, traverse, contour grinding Taper grinding possible with NC dressing ○Capacity / capacity Table swing φ200mm Center distance 250mm Grinding outer diameter φ60mm Workpiece weight 20kg ○Grinding wheel Grinding wheel dimensions Outer diameter φ355 x width 15-38 x inner diameter φ127mm Maximum operating peripheral speed 33 m/s ○Grinding wheel head Minimum setting unit φ0.0001mm ○Table Swivel angle = 12.5° to -0.5° Minimum setting unit φ0.0001mm ○Workpiece headstock Swivel type Stepless speed change [Fixed shaft rotating shaft combined headstock] Shank hole MT,2 Rotation speed 21-1000rpm ○Tailstock Manual type Shank hole MT, 2○Motor for grinding wheel spindle 2.2kw 4P○Tank, etc. Coolant tank 200L Hydraulic tank 20L Mag separator, paper filter device Mist collector device○Machine size Floor surface width 3800 x depth 2200 Weight 4000kg
|
Ibaraki | TOSHIN MACHINE TOOL CO.,LTD． | Details |
|
Tool Grinder | 飯田 | GE-120S | 1989 |
◆Rated voltage: 200V ◆Grinding wheel rotation direction: forward and reverse ◆No-load rotation speed: 50/60Hz: 3000/3600rpm ◆Grinding wheel dimensions: 100φ×34×17φ (cup type with flange) 100φ×13×12.7φ (dish type with flange) ◆End mill grinding range: 6-40mm ◆Maximum end mill blade length: 200mm ◆Ball end mill grinding total length: 210mm ◆Maximum diameter of grinding wheel: 150φ ◆Maximum operating peripheral speed: 2000m/min ◆Machine dimensions: 840×700×H1250mm ◆Weight: 400kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Tool Grinder | IIDA TEKKOU | GE-120S | Unknown |
#894558
|
Aichi prefecture | Kinoshita Machinery Co., Ltd. | Details |
|
Drill | OSG | GDS 2.75 未使用 | Unknown |
If there is a discrepancy between the content and the actual product, the actual product will take precedence. , [Online tour available] , *Prices/inventory quantities are listed in the machine link URL below.
|
Tokyo | EndoKikaiKogyo.INC | Details |
|
End Mill | OSG | GDR 10 未使用 | Unknown |
If there is a discrepancy between the content and the actual product, the actual product will take precedence. , [Online tour available] , *Prices/inventory quantities are listed in the machine link URL below.
|
Tokyo | EndoKikaiKogyo.INC | Details |
|
Insert Chip | KYOCERA | GDM6020N-300R-CM 10個 未使用 | Unknown |
If there is a discrepancy between the content and the actual product, the actual product will take precedence. , [Online tour available] , *Prices/inventory quantities are listed in the machine link URL below.
|
Tokyo | EndoKikaiKogyo.INC | Details |
|
Insert Chip | KYOCERA | GDM4020N-080GM-PR1225 |
The photos are representative ones.
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Others | GDH-1302（標準） | Unknown |
・Actual exhaust speed (at atmospheric pressure): 1,080 L/min at 50 Hz, 1,300 L/min at 60 Hz ・Pressure during continuous operation: 2 x 103 Pa (15 Torr) or less ・Motor: AC200V3φ4P 2.2 kW flange motor ・Intake/exhaust port: VG50/VF50 equivalent ・Weight: Approximately 87 kg (including motor)
|
Ibaraki Prefecture | TokyoEngineering | Details | |
|
Others | 島津エミット | GDH-1302（標準） | Unknown |
・Actual exhaust speed (at atmospheric pressure): 1,080 L/min at 50 Hz, 1,300 L/min at 60 Hz ・Pressure during continuous operation: 2 x 103 Pa (15 Torr) or less ・Motor: AC200V3φ4P 2.2 kW flange motor ・Intake/exhaust port: VG50/VF50 equivalent ・Weight: Approximately 87 kg (including motor)
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Insert Chip | KYOCERA | GDG4020N-040GS-PR1535 |
The photos shown are representative.
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Insert Chip | KYOCERA | GDG4020N-040GS-PR1535 |
The photos shown are representative.
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Insert Chip | KYOCERA | GDG3020N-020GS-GW15 |
The photos shown are representative.
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Bite | イゲタロイ | GDER2525-600S |
Shank angle 25mm Total length 150mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |