Upper die length 835mm effective height 105mm angle 88° gooseneck

Short intermediate plate width 100mm effective height 120mm

Upper die Length: 835mm Angle 90° Height: 97mm Pressure resistance 40t R0.2

Upper die Length 790mm (192/155/100LR/64/54/43/22/20/16/14/10) Effective height 64.5mm Tip R2 Angle 88° Additional machining marks on the back of 192, 16, and 14 Additional machining marks on the ears and front of 100LR Standard

Upper die Length 835mm (300/200/100LR/50/40/20/15/10) Angle 88° Effective height 64.7mm Tip R1.5 Pressure resistance 45t/m Standard

Radius ruler tip R12 length 420mm

Upper die length 835mm Effective height 67mm Punch holder

Upper die Length 485mm (160×2/80/40/20/15/10) Angle 90° Tip R0.2 Pressure resistance 50t/m Drop prevention groove, taper included Straight sword

Upper die Length 835mm (300/200/100LR/50/40/20/15/10) Effective height 66mm Tip R1.5 Angle 90° Pressure resistance 45t/m Standard

Upper die length 830mm (300/165/100×2/50/40/30/20/15/10) Effective height 92mm Tip R3 Pressure resistance 50t/m Straight R punch

Lower die Length 555mm Width 10/6 Height 46mm Pressure resistance 70t/m Angle 60° Concentric 2V die

Upper die Length 835mm Effective height 65.5mm Angle 30° Pressure resistance 100t/m Sharp angle for hemming

Upper die Length 835mm Effective height 67mm Angle 90° Tip R0.2 Pressure resistance 40t/m Standard taper

Lower die Length 835mm Angle 90° Height 97mm R0.2 Pressure resistance 20t

Lower die Length: 835mm Angle 90° Height: 26mm V width: 6/10mm Pressure resistance 70t The photo shows a representative one.

Lower die Length 835mm V width 5/9 Angle 88° Effective height 25.5mm Pressure resistance 65ton/m 2V die