Upper die Length: 835mm Angle: 90° Tip R: 0.2mm Effective height: 66.8mm Standard punch

Lower die Length 835mm V width 6/10/18 Effective height 60.0mm Pressure resistance 100ton/m 3U die

Lower die Length 835mm V width 6/10/18 Effective height 60.0mm Pressure resistance 100ton/m 3U die

Special mold for stepped bending Upper and lower set Upper mold length 375mm height 71.8mm Lower mold length 375mm height 35.5mm

Lower die Length 285mm (50/40/30/20/19/18/17/16/15/14/13/12/11/10) V width 6/10 Angle 90° Effective height 46.0mm Rail width 15mm Split 2V die

Upper die 392mm (100/50/50/40/20/19/18/17/16/15/13/12/11/10) Angle 90° Effective height 96.9mm Standard punch

Upper die length 835mm effective height 64mm angle 88° standard

Upper die Length 510mm Effective height 67mm Angle 88° Standard taper

Upper die Length 800mm Effective height 67mm Angle 88° Standard taper

Upper die length 600mm (300/100LR/100) Effective height 67mm Angle 88° Standard

Lower die Length 835mm V width 12/8 Height 26mm Width 50mm 2V die

Lower die Length 835mm V width 12/8 Height 26mm Width 50mm 2V die

Lower die Length 415mm V width 20/12 Height 26mm Width 50mm 2V die

Lower die Length 450mm V width 12/8 Height 26mm Width 50mm 2V die

Lower die Length 835mm V width 9/5 Height 25 mm Width 55mm 2V die

Lower die Length 835mm Width 50mm Height 15mm 2V dial rail There are cut marks at 20mm, 70mm, 120mm, and 255mm from the left of the dial rail. The size of the cut marks is 3mm, 10mm, 35mm, and 25mm.