Maximum stroke: 150mm, Stroke speed (50Hz): 22, 36, 51, 90rpm, Stroke speed (60Hz): 26, 43, 61, 108rpm, Table diameter: 350mm, Bit column distance: 455mm, Ram guide table distance: 385mm, Ram inclination: 15° left and right, Ram up and down adjustment: 230mm, Tool rest rotation: 90° left and right, Table travel distance: 280 left and right * 330 front and back

Three-phase 200V, with foot switch, crimping machine

◆Maximum drilling radius: 2775 ◆Maximum distance between column sleeve and spindle center: 2515 ◆Minimum distance between column sleeve and spindle center: 415 ◆Column sleeve diameter: 520 ◆Spindle taper: MT No.5 ◆Spindle vertical movement distance: 400 ◆Arm vertical movement distance: 860 ◆Spindle head left and right movement distance: 2100 ◆Spindle rotation speed: 20 to 1658 ◆Square table dimensions (width x length x height): 750 x 500 x 450 ◆Base dimensions (W x D x H): 3630 x 1260 x 300 ◆Base work surface: 2645 x 1250 ◆Spindle motor: 7.5kw ◆Drilling capacity: (cast iron) 85 (copper) 70 ◆Tapping capacity: (cast iron) 70 (copper) 60 ◆Bore capacity: (cast iron) 300 (copper) 220 ◆Machine dimensions: 3630 x H3150 x 1260 ◆ Total weight: Approximately 11,600 kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.

◆Table swing: 260mm ◆Center distance: 400mm ◆Table front/back left/right: 250 x 200 ◆Table rotation angle: 5 degrees left/right ◆Grinding wheel shaft diameter: 31.75φ ◆Grinding wheel diameter: 150D x 31.75d x 13W ◆Size: 540 x 660mm ◆Weight: 260kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆ Grinding wheel diameter: 150mm ◆ Grinding wheel hole diameter: 63.5mm ◆ Grinding wheel thickness: 50mm ◆ Maximum operating circumferential speed: 1700m/min ◆ No-load rotation speed: 3000/3600rpm (50/60Hz) ◆ Machine dimensions: 500×460×H1230mm ◆ Weight: Approximately 190kg _In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

◆Maximum travel amount: 750 x 270 x 450 ◆Size of working surface: 1350 x 270 ◆T-slots (number x width x spacing): 3 x 16 x 60 ◆Spindle taper hole: NST No. 50 ◆Spindle rotation speed: 68 to 1760 ◆Spindle end to table top: 450 ◆Spindle center to column front: 300 ◆Required area: W2515 x D2240 x H1935 ◆Weight: 2450kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

Table: Φ1300, hollow Φ100, pitch 12x3, travel: 650★

Grindstone dimensions: 305x25x25.4mm, Rotation speed: Max 50Hz 2500rpm/60Hz 3000rpm, Power supply specifications: 200V three-phase 0.75kW★

★

Rotation speed: 3000 rpm, Grindstone diameter: φ205 x 19 x φ15.88 (inner diameter) ★

Three-phase 200V core 200mm

★

Motor: 0.75kw, Tank capacity: 65ℓ★Input: 100V

★

・Rated primary input: 9.5KVA, 7KW ・Rated primary voltage: 200V ・Frequency: 60Hz ・Rated secondary current: 180A ・Capacitor capacity: 3.8KVA ・Capacitor voltage: 500V★

Length 6300★