71527 entries, 26641~26656 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Other | ソノルカエンジニアリング | UCLL-15 | 1986 |
Coil weight 1000kg, coil outer diameter 1200, coil inner diameter 508, plate thickness 0.3-1.6, plate width 150, 0.75kw, #2020
|
Shizuoka Prefecture | OTA YOSHIO MACHINE INDUSTRY CO.,LTD | Details |
|
Forming Grinder | Mitsui High-tec | MSG-250H2 | 1986 |
Attached (grindstone)
|
Chiba Prefecture | KA Machine Co., Ltd. | Details |
|
Corner Shear | AMADA | CSW-250 | 1986 |
Maximum plate thickness 3.2 Corner notch 250 x 250 Machine weight 1100 kg
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Desktop Drilling Machine | 天理 | TSD-13 | 1986 |
Drilling 13, 100V
|
Osaka | Kei-Machine Co.,Ltd. | Details |
|
Vertical Milling Machine | OKK | MH-2V | 1986 |
X720 Y260 Z360, T1310X290, 60~1800rpm, 3-axis digital, NT50
|
Osaka | Kei-Machine Co.,Ltd. | Details |
|
Tool Grinder | MAKINO | C-40 | 1986 |
Headstock indexing device, Radius grinding device (No.1), Helical grinding device
|
Osaka | Kei-Machine Co.,Ltd. | Details |
|
Tool Grinder | NAKABO TEKKO | HSP30 | 1986 |
Grinding range 2-30mm Tip angle 90°-180°
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Forming Grinder | NICCO MACHINE TOOL | NFG-515HD | 1986 |
Automatic left/right, automatic cutting, rotation speed: 3000/3600rpm (50/60Hz), grinding wheel diameter: Φ205x3-32xΦ31.75 (inner diameter), table: 380x120 (tilting chuck ±90 degrees), wet type★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Radial Drilling Machine | 池田 | RMA-1500 | 1986 |
★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Internal Grinder | TOYODA MACHINE WORKS | GH40-100 | 1986 |
Swing: 400mm Chuck cover inner swing: 360mm Distance between chuck front and spindle end face: Maximum 1139mm Spindle taper: MTNo.3 Internal grinding spindle speed: 9000rpm (50Hz) 12000rpm (60Hz) Spindle speed: 20-300rpm Headstock taper: MTNo.5 Table diameter: 1055mm End face spindle speed: 3400rpm ★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Lappers | JND9B-8P-4D | 1986 |
4 motors, 4 ways, DP12, 8 carriers, water cooling mechanism for upper and lower plates, I gear/S gear SUS specification★.
|
Ibaraki Prefecture | TokyoEngineering | Details | |
|
Vertical Milling Machine | MAKINO | KVJP-55 | 1986 |
Spindle inverter specification (80-4000rpm), table: 1100×250★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Vertical Milling Machine | AMADA | AM103 | 1986 |
Table: 1050×300★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Cylindrical Grinder | MIG-MG-200 | 1986 |
Table swing: 170mm Center distance: 200mm Maximum grinding diameter: 60mm Grinding wheel size: 205x13(25)x50.8mm Grinding wheel speed: 3100rpm Swivel angle: ±30° Manual feed travel distance: 95mm Headstock swivel angle: ±45° Spindle speed: Maximum 800rpm Center taper: MT No.1 Tailstock travel distance: 15mm Tailstock center taper: MT No.1 Table swivel angle: ±10° Table handle feed amount: 200mm★.
|
Ibaraki Prefecture | TokyoEngineering | Details | |
|
Lappers | SK-2F | 1986 |
6 axes, φ350 plate, weight pressure, axis distance 540, 1 motor★
|
Yamanashi Prefecture | TokyoEngineering | Details | |
|
Others | KOYO MACHINE INDUSTRIES | KVD-300G | 1986 |
★
|
- | TokyoEngineering | Details |