71526 entries, 26609~26624 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Vertical Milling Machine | KOKUBO | KC-2 | 1987 |
◆XYZ: 260×110×265 ◆Table work surface: 150×500 ◆MT No.3 ◆(50/60Hz) 500~1520rpm/600〜1820rpm ◆Motor: 1HP (0.75kw) ◆Floor space: 470×500mm ◆Machine height: 1420mm ◆Weight: 300kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Others | 吉川 | US-66 | 1987 |
◆Riveting capacity: φ0.5 to φ5mm mild steel ◆Pressure force: 515kgf ◆Cylinder stroke: 5 to 40mm ◆Spindle motor: 120W AC200V 50/60Hz ◆Power supply: 3φ AC200V 50/60Hz 280VA ◆Supply air pressure: 4.2kgf/cm2 ◆Weight: 112kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Forming Grinder | NICCO MACHINE TOOL | NFG-515 | 1987 |
Chuck size 315 x 110 With front and rear digital scales With up and down fast forward With dust collector With upper dresser
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Other | 東洋 | CC-1 | 1987 | Saitama | Kobayashi Kikai Co.,Ltd. | Details | |
|
Forming Grinder | Mitsui High-tec | MSG-200M | 1987 |
Chuck size 250 x 120 with 2-axis digital scale and dust collector
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Tool Grinder | FUJITA WORKS | DG-25UBX | 1987 |
Three-phase 200V
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Horizontal Milling Machine | KOKUBO | KC-1 | 1987 |
◆XYZ: 260×110×235 ◆Table work surface: 150×500 ◆Arbor diameter: 25.4mm ◆Spindle hole taper: MT No.3 ◆Spindle speed: (50/60Hz) 210-1300/260-1570rpm ◆Motor: 0.75kw ◆Required floor space: 470×500×H1320mm ◆Weight: 350kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Tool Grinder | FUJITA WORKS | DG25BFX | 1987 |
Three-phase 200V Capacity φ3-25 Grinding wheel diameter φ125×45×19Wmm Rotation speed (50/60) 2890/3490rpm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Vertical Milling Machine | SHIZUOKA MACHINE TOOL | VHR-A | 1987 |
NT40 Table size 1100 x 280 Spindle speed 75-3600 rpm With left and right feed With up and down fast feed With XY digital scale
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Vertical Machining Center | 不二精機 | FMC-6/21VR | 1987 | Ishikawa Prefecture | KOWA MACHINERY CO.,LTD | Details | |
|
Tool Grinder | フジタ | DG07BX | 1987 | Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Vertical Milling Machine | MAKINO | KVP-55 | 1986 |
NT40 Table size 1100 x 250 Stroke X550 Y250 Z350
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
|
Tool Grinder | MAKINO | C-25 | 1986 | Saitama | Kobayashi Kikai Co.,Ltd. | Details | |
|
Cutting Machine | Komatsu | K-? | 1986 |
◆Machine size: L1500×W515×H1550mm ◆Punching (hole drilling): 12t×25Φ ◆Notching (corner cutting): 90° cutting 9t×95×75 / 45° cutting 9t×130×65 ◆Shearing (flat steel plate cutting): 9t×300 ◆Bar cutting (bar steel cutting): round steel 38Φ / square steel 28□ ◆Angle cutting: 90° cutting 10t×100×100 / 45° cutting 9t×75×75 _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Tool Grinder | MAKINO | YGR-25 | 1986 |
3-phase 200V 50/60Hz 3800/6500rpm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Tool Grinder | 大和 | CG-200-N | 1986 |
◆Maximum tool diameter: 170mm ◆Tool length: 200mm ◆50R ◆Left/right movement: 200mm ◆Up/down movement: 150mm ◆Front/back movement: 100mm ◆Grindstone rotation speed: 2810rpm ◆Grindstone spindle motor: 200V 0.4kw ◆Required floor space: 550×400×H1350mm ◆Total machine weight: 380kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |