Direct pressure type, table slide type, manual rotating table: φ1200★

25t Stroke number 120 Stroke length 50 Die height 190 Slide adjustment amount 50 Slide dimensions 250 x 200 Bolster dimensions 550 x 300 Light safety attached

Table size: φ700★.

S/N 111467 Surface plate φ600★

2 motors★.

No.7727★

10-inch 3-jaw chuck, spindle speed 25-1500 rpm, center distance 1000

4.5 x 2000 Electric Clearance Auto Back Gauge with Air Support

◆Table size: 2000×450mm ◆T-slot: 20mmH8×5 ◆XYZ: 1400*600×680mm ◆Distance from spindle end to table top: 35-715mm ◆JIS No.5 ◆35-2000min-1 ◆Spindle motor: 11kw×4P ◆Machine dimensions: W4350×D2300×H2950mm ◆Weight: 7.2T

Electromagnetic chuck diameter 1250 Distance from bottom of grinding wheel to top of chuck 420 Swing inside cover Φ1600 Grinding wheel movement (up and down) 485 Grinding wheel size 610Φ×75×203.3Φ ★Maintenance details and test cut table are currently available.

◆Table: 310 x 1370 ◆XYZ: 870 x 370 x 400 ◆Spindle tip: No. 50 ◆Rotation speed: 40 to 1750 min-1 ◆Spindle drive: 4P-5.5 kW ◆Machine size: W1920 x D2260 x H1866 mm ◆Weight: Approximately 2750 kg *For horizontal milling. Comes with a full set of accessories. In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

[Video available. Please check below.] ◆100V ◆1450W ◆50-60Hz ◆3800rpm ◆Grinding wheel: Outer diameter 345 x thickness 4.5 x hole diameter 25.4mm ◆Weight: 15kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.

◆Measurement range: X (horizontal) 100mm Y (vertical) 50mm ◆Minimum resolution: X (horizontal) 0.1μm Y (vertical) 0.25μm ◆Measurement force: 10 to 30mN ◆Measurement position: Measurement possible in both upward and downward directions ◆Drive speed: 0.03, 0.06, 0.15, 0.3, 0.6, 1.5, 3mm/s ◆Recording width: 400 x 285mm ◆Measurement height: 220mm ◆Digital output: RS-232C ◆Power supply: AC100V 50/60Hz ◆Installation dimensions: 2300W x 750Dmm _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆75 to 4000 rpm ◆Spindle head rotation angle: +45° ◆Table: 1100 x 250 ◆XYZ: 550 x 250 x 350 ◆Weight: 1550 kg *No vertical feed. In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

Operation type: Dry grinding, all axes manually operated by handle, with up and down fast forward movement of grinding wheel head. Chuck: Electromagnetic magnet, tiltable sine bar type. Chuck dimensions: Length 380mm x Width 110mm, Height 130mm. Grinding range: Left/Right 450mm x Front/Back 180mm. From top of table to bottom of standard grinding wheel: 310mm. Table: Working area: Length 600mm, Width 140mm, T-slot 12mm x 1. Allowable weight: 80kg including chuck. Movement: Left/Right 540mm x Front/Back 180mm. Grinding wheel: 50Hz: Outer diameter φ180mm x Width 6-32mm x Inner diameter φ31.75mm. Rotation speed: 3000/3600rpm (50/60Hz). Feed: Left/Right: Feed per turn of handle: 100mm. Up/Down: Manual grinding wheel head infeed: 1 scale per dial: 0.002mm, 1mm per turn of handle. With up/down fast forward movement. Power source: Motor. For grinding wheel spindle: 0.75kw 2P For vertical fast forward: 0.1kw 4P Power: 1.5KVA Machine dimensions Floor surface: Width 2200mm x Depth 1351mm Height 1727mm Weight: 1050kg

◆180mm ◆100V ◆50/60Hz _If there is a difference between the specifications and the actual product, the actual product will take precedence.