FANUC20-T 10-inch 3-jaw scroll chuck, spindle through hole diameter 77, center distance 800, bed swing 460

◆Control device: FANUC Series 15-M ◆Travel amount XYZW: 2000×760×850×1030 ◆Distance from table top to vertical spindle end: 150-1000 ◆Distance from column front to vertical spindle center line: 700 ◆Distance from table top to horizontal spindle center line: 20-1050 ◆Table work surface size: 2500×655 ◆Maximum table load: 3000 ◆Table top shape: 22mm T-slots x 5 ◆T-slot spacing: 125 ◆Spindle rotation speed: 20-4000min-1 ◆Spindle taper hole: 7/24 taper NO. 50 ◆Spindle bearing inner diameter: 100 ◆Rapid traverse speed XY: 10000mm/min ◆Rapid traverse speed ZW: 10000mm/min ◆Cutting feed speed XYZW: 1-3600mm/min ◆Spindle motor: AC1kW/30min Model 12 ◆ Feed axis motor XY: AC 3.3 kW ◆ Feed axis motor ZW: AC 3.5 kW ◆ Hydraulic motor: 2.2 kW ◆ Hydraulic unit tank capacity: 40 L ◆ Machine dimensions: W 6670 x D 4250 x H 3520 ◆ Machine weight (including NC unit): 21,300 kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

FANUC-0-Mate Collet Chuck Table Size 185 x 340 with Center

[Video__ available. Please take a look!] ◆Table swing: 320 ◆Center distance: 1000 ◆Grinding diameter: 0-φ220 ◆Grinding wheel: φ405×75×inner diameter φ127 ◆Table rotation angle: 10-3° ◆Headstock center: MT No.4 ◆Spindle rotation speed: 16-500rpm ◆Total power supply: 10.8kVA ◆Required floor space: 4.5×1.8m ◆Weight: 3,800kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

NT40 Table size 1100×250 Spindle speed 75-4000rpm Stroke X550 Y250 Z350 With up/down and left/right feed With XY digital scale

FANUC0-M Chuck size 800 x 400

5-axis movable weight 3Kg

7 inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 30, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.

7 inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 30, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.

7 inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 30, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.

7 inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 30, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.

Coil width: 200mm Coil inner diameter: 508mm Maximum coil outer diameter: 900mm Maximum coil mass: 260kg

7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.

professional　J