71494 entries, 25857~25872 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Lathe | 滝沢 | TAL-560 | 1996 |
9-inch 3-jaw scroll chuck, center distance 1500, rotation 25-1500 rpm, through hole diameter 76, bed swing 560, carriage swing 340, with cut-off
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
NC Lathe | MAZAK | M4 | 1996 |
MAZATROL Tplus, center distance 1000, solid 12 inches, turret 4 corners 8 corners, 2200 rpm, fixed, tool eye, chip con
|
Osaka Prefecture | Kei-Machine Co.,Ltd. | Details |
|
TIG | Panasonic | YC-150TWX | 1996 |
It's a little old, so there are some scratches and stains, but it was used at a polishing shop and only occasionally, so it's in good condition due to low usage. I did a welding test and it worked well and can be used without any problems. The power supply is single-phase 200V, so it can be used even in places without a mains power source. Specifications: Rated input voltage: Single-phase 200V Rated input: 7.6KVA (5.5KW) Rated output current: DC 150A, AC 130A Rated usage rate: 40% Weight: 21kg Year of manufacture: 1996 Accessories: Air-cooled torch, gas meter, gas hose, base material cable, primary input cable (included with the unit), instruction manual
|
Osaka Prefecture | Sinko Shoukai Ltd. | Details |
|
C-Frame Press | AIDA ENGINEERING | NC1-60(2) | 1996 |
Stroke speed: 45~85spm Stroke length: 140mm Slide adjustment: 70mm Die height: 300mm #10206-8554
|
Shizuoka Prefecture | OTA YOSHIO MACHINE INDUSTRY CO.,LTD | Details |
|
NC Vertical Milling Machine | YAMASAKI GIKEN | YZ-8CR | 1996 |
F-20-F, with vise
|
Chiba Prefecture | KA Machine Co., Ltd. | Details |
|
Lathe | 滝沢 | TSL-550D | 1996 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
TIG | DAIHEN | AVP-300Ｐ(S-3) | 1996 |
- Rated input voltage: Three-phase 200/200V - Rated input current: 32/29A - Rated frequency: 50/60Hz - Rated output current: 300A - Output current range: (AC TIG) 10-100A, (DC TIG) 4-300A, (Manual welding) 10-250A - Weight: 56Kg ★
|
Kumamoto Prefecture | TokyoEngineering | Details |
|
Projector | Mitutoyo | SV-600 | 1996 | Ibaraki Prefecture, | TokyoEngineering | Details | |
|
Others | FUTABA | NCR100A | 1996 |
Material width: 10~100mm, Material thickness: 0.1~1.6mm, Feed length: 1~2999.99mm, Motor output: 0.4kw, Power supply: Single phase 200V, Air pressure: 0.2~0.4MPa, Machine weight: 40kg★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Others | クリーンテクノロジー | UVC-SB | 1996 |
★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Others | FUJI ELECTRIC | OPC-G9S-AIO | 1996 |
For FRENIC5000G9S
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Dust Collector | LOSMA | CA.10.25 | 1996 |
60Hz★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Others | ホリバ | ES-12 | 1996 |
DC:9V Conductivity:0.0μ-1.999S/CM Resistivity:0.0-MΩ.CM★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Others | ESPEC | PH-3ST | 1996 |
S/N: 13005259 Power supply: 3φ200V 16.5ATEMP＆HUMID +10～+100℃ 60～98％RH Internal dimensions: (width) 790mm (depth) 600mm (height) 850mm External dimensions: (width) 1180mm (depth) 1000mm (height) 1690mm★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Projector | TOKYO SEIMITSU | contourecord-1600C | 1996 |
Measurement range: Z axis 50mm, X axis 100mm (200mm for -22 system)★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Others | UVP | UVG-54 | 1996 |
AC100V, handy type★
|
Ibaraki Prefecture, | TokyoEngineering | Details |