MAZATROL MATRIX2 8-inch 3-jaw chuck on both sides, 12-sided turret on both top and bottom, with chip conveyor and tool eye

MAZATROL MATRIX NEXUS2 BT40 ATC60 pcs 400mm square 2 pallets Spindle speed 18000rpm Stroke X560 Y640 Z640 1 degree indexing Tool length measurement Touch sensor included

Power supply: Three-phase 200V Rotation speed (rpm) 60/50Hz: 50/25/42/21 Saw blade: φ315 Cutting capacity (mm): Round pipe φ95, square pipe 85x85, angle 85x85, round bar φ55, square bar 50x50 Body dimensions Width (mm): 700 Depth: 1000 Height: 1550 Weight (kg): 360

6-axis

Maximum specification pressure 0.83MPa, initial water test pressure 1.25MPa, internal volume 390L

Fanuc-0i-TD, Gantry loader, IN stocker device, OUT conveyor device, 2-jaw chuck (Teikoku SOUL), Seating confirmation device, 2015 and 2016 models also available,

T:290*1300, S:710*280*400, 3-axis new digital

Fanuc-32i ModelB

Control: M730BM, BT40, ATC20, Table: 790 x 560, Stroke: 635 (X) x 510 (Y) x 460 (Z), Spindle speed: 8000 rpm★

Fanuc-0iTD, Grindstone: maxφ455*150*φ228.6

Cutting capacity: Round timber Φ330 Square timber 330×330 Blade dimensions 4115×41×0.9/1.3

0.7 ton, gasoline vehicle

Measurement range: 600*500*300, probe Renishaw PH1

Maximum pressure 0.93MPa, 60Hz, Excellent condition, Operating time 7712 hours, Tank capacity 130L, Oil changed

Operating time 7712 hours, tank capacity 130L, oil changed, 60Hz

Airman, 25 horsepower 18.5kw medium pressure specification, weight 540kg, elapsed time 24180 hours, maintenance inspection completed, oil filter element replacement, suction filter replacement, separator element replacement, separator O-ring replacement, full oil replacement