71566 entries, 22433~22448 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Lathe | ワシノ | LR-55A | 1997 |
◆SOUL MS♯7 chuck (MAX 2200rpm) ◆Swing above bed: 360mm ◆Swing above carriage: 210mm ◆Center distance: 550mm ◆Spindle taper: MT No.5 ◆Spindle through hole diameter: φ40 ◆Bed (width x length): 275 x 1350 ◆Main motor: 3.7kw x 4P ◆Machine size: W1650 x D760 x H1140mm ◆Weight: 920kg *With scale (XYZ) _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Robot | FANUC | LR Mate 100 | 1995 |
5-axis movable weight 3Kg
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Lathe | ワシノ | LPT-35C | 1985 |
◆SOUL #7 3-jaw chuck◆Swing above bed: 360 ◆Swing above carriage: 180 ◆Center distance: 500 ◆Spindle taper hole: MT No.5 ◆Spindle through hole: 32mm ◆56-2500rpm ◆Bed width x length: 280 x 1350 ◆Machine size: W1700 x D1080 x H1190mm ◆Weight: 1200kg *Scale included_In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Lathe | ワシノ | LPT-35C |
8-inch 3-jaw scroll chuck, center distance 500, spindle through hole 32, spindle speed 56-2500 rpm, swing above bed 360, swing above carriage 180
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details | |
|
Lathe | ワシノ | LPT-35C | 1983 |
7-inch 3-jaw scroll chuck, center distance 500, spindle through hole 32, spindle speed 56-2500 rpm, swing above bed 360, swing above carriage 180, 1-axis digital scale
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Lathe | WASINO | LPT-35C | 1979 | - | KOWA MACHINERY CO.,LTD | Details | |
|
Lathe | WASINO | LPT-35C | Unknown |
Center distance 500mm, swing above bed 360mm, chuck size 7 inches,
|
Osaka Prefecture | OTOMO Machine Co. Ltd. | Details |
|
Lathe | ワシノ | LPT-35C | 1986 | Saitama | Kobayashi Kikai Co.,Ltd. | Details | |
|
Lathe | WASINO | LPT-35C | 1966 |
Rotation speed: 56-2500rpm (12 stages), Chuck: Three jaws φ190, Hole diameter φ40, Through hole diameter: φ32, Center distance: 500★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Lifter | KANETSU | LPF-8V 80kg | Unknown |
If there is a discrepancy between the content and the actual product, the actual product will take precedence. , [Online tour available] , *Prices/inventory quantities are listed in the machine link URL below.
|
Chiba Prefecture | EndoKikaiKogyo.INC | Details |
|
|
Others | KANETEC | LPF-25A |
Lifting capacity 250kg Ground contact area 130×180mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
|
Others | KANETEC | LPF-25A |
Lifting capacity 250kg Ground contact area 130×180mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Others | KANETEC | LPF-20VA |
Lifting capacity 250 kg Magnet part 250 x 100 mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Others | KANETEC | LPF-20V |
Lifting capacity 250 kg Magnet part 250 x 100 mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Compressor | TOSHIBA | LP7D-4S | Unknown |
Oil-free, 100V★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Lathe | KURAKI | LP402-15 | 1977 | Osaka Prefecture | Kei-Machine Co.,Ltd. | Details |