MAZATROL-M-PLUS, ATC-24, S (XYZ) 1120×510×510, spindle speed 7000rpm

 KA Machine Co., Ltd. 

Kei-Machine Co.,Ltd.

Center distance 640mm, swing above bed 435mm, chuck size 7 inches, chuck can be used with soft jaws as well.

OTOMO Machine Co. Ltd.

Kei-Machine Co.,Ltd.

Kei-Machine Co.,Ltd.

Kei-Machine Co.,Ltd.

, Control device: MAZATROL SmoothG, Table: 900 x 430 mm, Stroke X x Y x Z: 560 x 430 x 510 mm, Spindle taper: BT40, Maximum spindle speed: 12000 min-1, Tool storage capacity: 30, Rapid forward speed: X42, Y42, Z42 m/min, Spindle motor: 11/7.5 kW, Machine size: Width 2072.3 x Depth 2397.5 x Height 2805 mm

OTOMO Machine Co. Ltd.

TOSHIN MACHINE TOOL CO.,LTD．

MAZATROL SMOOTH G BBT40 ATC30 spindle speed 12000rpm Table size Φ500 Stroke X350 Y550 Z510 A-120〜38° C360° With touch sensor

Kobayashi Kikai Co.,Ltd.

MAZATROL SMOOTH C 21-inch 3-jaw chuck (Kitagawa/NV21-15) 12-point turret ATC 10 pieces Stroke X345 Z520

Kobayashi Kikai Co.,Ltd.

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

Intex, Inc.