TOSHIN MACHINE TOOL CO.,LTD．

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Power supply: Matrix ◆Travel XYZ: 510×510×460 ◆Travel AC: +30°〜-120°,±360° ◆Distance from table top to spindle end: 190〜650mm (table surface) ◆Table work surface size: Φ500×W400 ◆Maximum workpiece dimensions: Φ500×405 ◆Maximum table load mass (evenly distributed): 300kg ◆Table top shape: 18mm T-slot × 5, 80 pitch ◆Spindle rotation speed: 12000min-1 ◆Spindle taper hole: 7/24 taper NO.40 ◆Spindle bearing inner diameter: Φ80 ◆Fast forward speed XYZ axis/A axis/C axis: 52000mm/min, 10min-1, 25min-1 ◆Cutting feed speed XYZ-axis/A-axis/C-axis: 1-52000mm/min, 1-10min-1, 1-25min-1 ◆Minimum index angle A-axis, C-axis: 0.0001 ◆Tool shank shape: BT-40 ◆Number of tools that can be stored: 30 ◆Maximum tool diameter/length/mass: Φ80mm/300mm/8kg ◆Maximum tool diameter when there are no adjacent tools: Φ125mm ◆Tool selection method: Address-fixed automatic shortcut method ◆Tool change time: 4.5 seconds ◆Spindle motor: (1 min/30 min/continuous rating): 26.4/22/15kw ◆Coolant motor: 0.230/0.365KW ◆Power supply: 36.6/44.5kVA (continuous/30 min) ◆Air pressure source: 360NL/min ◆Machine mass: 7500kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

MAZATROL 640M 5X BT40 ATC30 pieces 400 square 2 pallets Stroke X510 Y510 Z460 A+30°～-120° C±360 With right-hand chip conveyor With tool length measuring device

Kobayashi Kikai Co.,Ltd.

MAZATROL SMOOTH G BBT40 ATC30 spindle speed 12000rpm Table size Φ500 Stroke X350 Y550 Z510 A-120〜38° C360° With touch sensor

Kobayashi Kikai Co.,Ltd.

Kobayashi Kikai Co.,Ltd.

MAZATROL MATRIX2 BT40 ATC30 Spindle speed 12000 rpm Table size φ500 Stroke: X350 Y550 Z510 With touch sensor With left-side chip con With through spindle

Kobayashi Kikai Co.,Ltd.

MAZATROL MATRIX2 BT40 ATC30 Spindle speed 12000 rpm Table size φ500 Stroke: X350 Y550 Z510 With touch sensor With right-side tip con With through spindle

Kobayashi Kikai Co.,Ltd.

MAZATROL MATRIX2 BBT40 ATC 30 pieces Spindle speed 12000 rpm Table size 600 x 500 Stroke X450 Y850 Z550 B-120 to +90° C±360° Tool length measuring device included Touch sensor included Right-side chip capacitor included

Kobayashi Kikai Co.,Ltd.

Kei-Machine Co.,Ltd.

Kei-Machine Co.,Ltd.