24 entries, 1~16 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Lathe Chuck | OKUMA & HOWA | HL-35L | 2004 |
◆FANUC18iTB ◆Howa 12-inch chuck (solid) ◆Maximum swing: φ500 ◆Machining diameter x length: φ350 x 1020 ◆Bar processing capacity: φ78 ◆Distance between both centers: 1020 ◆Spindle through hole: φ92 ◆3500min-1 ◆V12 ◆XZ: 200 x 1020 ◆MT5 ◆Total power supply capacity: 32KVA ◆Machine size: W3,370 x D1,870 x H1825mm ◆Weight: 5,000kg
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Vertical Machining Center | OKUMA & HOWA | MILLAC561V | 2006 |
OH-OSP-Hmi ATC20 BT40, table 1350 x 560 12000 rpm, stroke 1050 x 560 x 520, with round handle, internal screw-type chip conveyor, interactive program C, manual angle/arc feed, helical cutting, arbitrary angle chamfering, tool life management function, F1 digit feed, Super Hi-NC NURBS command, accessories, instruction manual
|
Aichi prefecture |
Kawakami Kikai Co.,Ltd.
|
Details |
|
NC Vertical Milling Machine | OKUMA & HOWA | FM-2V | 1989 |
T:1350*310 S:710*300*410 Rotation speed:60-1800 NST No.50, NC device: FRIEND MILL X, Y, Z axes manual operation only
|
Shizuoka Prefecture |
OTA YOSHIO MACHINE INDUSTRY CO.,LTD
|
Details |
|
Vertical Milling Machine | OKUMA & HOWA | STM-2R | 1987 |
Okuma Toyokazu Ram-type general-purpose milling machine STM-2R, 3-axis digital counter attached, spindle taper = NT40, table dimensions = 1350 mm x 310 mm, spindle speed = 50 Hz 85-3000, 60 Hz 100-3600, instruction and maintenance manual, parts list included, , If there is a difference between the contents and the actual product, the actual product will take precedence. , [Online tour available], *Price/stock number is listed on the machine URL below* , ,
|
Chiba Prefecture |
EndoKikaiKogyo.INC
|
Details |
|
Vertical Milling Machine | OKUMA & HOWA | STM-2V | Unknown |
T:1350*310, NT50, left/right, front/back, up/down feed, 2-axis scale
|
- |
EndoKikaiKogyo.INC
|
Details |
|
Vertical Milling Machine | OKUMA & HOWA | STM-2R | 1987 |
2-axis digital
|
Aichi prefecture |
Kinoshita Machinery Co., Ltd.
|
Details |
|
Vertical Milling Machine | OKUMA & HOWA | STM-2V | 1981 | Aichi prefecture |
Kinoshita Machinery Co., Ltd.
|
Details | |
|
Vertical Milling Machine | OKUMA & HOWA | STM-2V | 1984 | Aichi prefecture |
Kinoshita Machinery Co., Ltd.
|
Details | |
|
Vertical Milling Machine | OKUMA & HOWA | STM-2R | 1980 |
X710 Y300 Z410, T1350X310, 100~3600rpm, 2-axis digital, NT40
|
Osaka |
Kei-Machine Co.,Ltd.
|
Details |
|
Vertical Milling Machine | OKUMA & HOWA | STM-2V | 1981 |
X710 Y300 Z410, T1350X310, 60~1800rpm, 3-axis digital, NT50
|
Osaka |
Kei-Machine Co.,Ltd.
|
Details |
|
Lathe Chuck | OKUMA & HOWA | 2SP-15HG | 2003 |
◆R side: Toyowa 8 inch solid chuck ◆L side: Collet chuck (collet outer diameter 65) *Inner diameter measuring device *Loader and stocker included *Chip conveyor (rear discharge) _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Vertical Machining Center | OKUMA & HOWA | M-561V | 2004 |
BT50 spindle rotation speed 10000rpm ATC20 FANUC 16i-M Helical has ★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Vertical Milling Machine | OKUMA & HOWA | STM-2V | 1990 |
*If there is a difference between the scale specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Vertical Milling Machine | OKUMA & HOWA | STM-2V | 1992 |
◆Table work surface: 1350 x 310 mm ◆Maximum load capacity: 250 kgf ◆XYZ: 710 x 300 x 410 ◆Spindle: No. 50 ◆60 to 1,800 min-1 ◆Required floor space size: 1250 x 750 mm ◆Weight: 3,000 kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
NC Vertical Milling Machine | OKUMA & HOWA | FMR-40 | 1997 |
◆OH-OSP-HMC ◆Table: 800×410 ◆Maximum load capacity: 350kg ◆XYZ: 580×410×400 ◆Spindle taper: No.40 ◆60-4000rpm ◆Power capacity: 12KVA ◆Machine size: W1800×D2505×H2335mm ◆Weight: 2950kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
NC Vertical Milling Machine | OKUMA & HOWA | FMV-30 | 2005 |
◆FANUC20i-F ◆XYZ: 710×320×410 ◆Table: 1350×310 ◆Table top surface to spindle end surface: 50 to 460 ◆Permissible workpiece weight: 300kg ◆25 to 2500rpm ◆Spindle No. 50 ◆Spindle bearing inner diameter: φ100mm ◆Required floor space size: 1860×1950mm ◆Weight: 3,100kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |