101 entries, 1~16 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
NC Surface Grinder | Okamoto Machine Tool Works | PSG-63CA3 | 2019 |
FANUC 0i-MF, left/right, up/down, front/back simultaneous 2-axis/3-axis control, rotation speed: 500-2500rpm, table travel: 750x340, grinding wheel diameter: φ350ｘ38ｘφ127 (inner diameter), rotary dresser★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NCRotary Grinder | Okamoto Machine Tool Works | SRG-200 | 2000 |
Horizontal axis, cup type★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NCInternal Grinder | Okamoto Machine Tool Works | IGM-15NC | 2004 |
FANUC 18i-TB2 Spindle Specifications: Grinding wheel rotation speed: Grinding wheel axis 1: 10,000 rpm (oil mist type), Grinding wheel axis 2: 60,000 rpm (oil mist type) Three-jaw scroll chuck 9 inches★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NCInternal Grinder | Okamoto Machine Tool Works | IGM-15NC | 2008 |
FANUC 18i-TB, Grinding wheel speed: 20000rpm (oil mist type), Spindle speed: 100-850rpm, Three-jaw scroll chuck★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-52DX | 1991 |
Spindle inverter, front and rear scale, rotation speed: 3000 rpm, grinding wheel diameter: φ205x19xφ50.8 (inner diameter), table: 500x200mm, FX controller★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-65GX | 2024 | Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-52EN | 1998 |
Rotation speed: 3000 rpm, Grindstone diameter: φ205 x 19 x φ50.8 (inner diameter), Chuck: 500 x 200, automatic forward/backward/left/right, automatic cutting★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-65DX | 1993 |
FX controller, speed: 1500 rpm, wheel diameter: φ355 x 38 x φ127 (inner diameter), table: 600 x 500, automatic front/back/left/right, automatic cutting★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PFG-500P | 1990 |
Automatic up/down/left/right, Grindstone diameter: Φ180mm x thickness: 6-32mm x hole diameter Φ31.75mm, Table: 590x140mm, Electromagnetic tilting chuck: 315x110mm (tilt angle: 15° front, 80° back)★.
|
Kumamoto Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-63DX | 2008 |
Rotation speed: 1500 rpm, Grindstone diameter: φ355 x 38 x φ127 (inner diameter), Table: 600 x 300, Automatic front/back/left/right cutting, FX controller★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-84DX | 1997 |
FX controller, Rotation speed: 1500 rpm, Grindstone diameter: φ355 x 38 x φ127 (inner diameter), Table: 800 x 400★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-65DX | 1991 |
FX controller, rotation speed: 1500 rpm Grindstone diameter: φ355 x 38 x φ127 (inner diameter) Table: 600 x 500 Automatic front/back/left/right Automatic cutting★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | OMA-350 | 1988 |
Table: 150×300, 1-axis scale (front and back)★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PFG-500P | 1992 |
Automatic up/down/left/right, Grindstone diameter: Φ205x6-32xΦ31.75 (inner diameter), Table: 380x120 (tilting chuck ±90 degrees), Wet type★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PFG-500A | 1996 |
Fully automatic, Grindstone diameter: Φ205x6-32xΦ31.75 (inner diameter), Table: 380x120 (tilting chuck ±90 degrees), Wet type★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PFG-450DXC | 1999 |
Sine bar chuck: 350 x 100 (angle up to 100 degrees), 2-axis counter (Y, Z axis), automatic left and right, manual front and back/up and down, grinding wheel: Φ180 x Φ31.75, rotation speed: 2850/3420 rpm (50 Hz/60 Hz), wet type★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |