669 entries, 609~624 shown
Card View
| Product Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
45T press | AMADA | TP-45C-X | 1982 |
(Reconditioned and repainted), Stroke speed: 60spm, Stroke length: 140mm, Die height: 205mm, Slide adjustment: 60° (manual), Slide bottom dimensions (left/right x front/back): 400 x 350mm, Bolster dimensions (left/right x front/back): 800 x 450mm
|
Osaka Prefecture |
SK Machine Co., Ltd.
|
Details |
|
80T press (die cushion specification) | AMADA | TP-80-AX | 1993 |
s:180, DH350, 50spm, Adj80, S550×450, B1000×600 (DC pin hole)
|
Osaka Prefecture |
SK Machine Co., Ltd.
|
Details |
|
Link Motion | AMADA | TP60-SIL | 1996 |
◆Pressure capacity: 60t ◆Stroke number: 40-75spm ◆Stroke length: 180mm ◆Slide adjustment amount: 70mm ◆Slide bottom surface dimensions (left/right x front/back): 500 x 600mm ◆Bolster dimensions (left/right x front/back): 920 x 980mm ◆Die height: 315mm ◆Main motor: 5.5KW ◆Air pressure used: 5.0kgf/cm2 ◆Emergency stop time: 170ms ◆Setting position of overrun monitoring device: 15deg ◆Machine size: W1000 x D1725 x H2615mm ◆Machine weight: 6.2T
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Crank press (Type C, single) | AMADA | TP60FX | 2021 | Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details | |
|
Crank press (Type C, single) | AMADA | TP60FX | 2020 | Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details | |
|
Punching mold | AMADA | TPG'Ⅱ |
Tapping mold Size: 2in Processing range: M3-M5 With M3 tap
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
C-type press | AMADA | TPL45SI | 2009 |
45t Stroke number 100-150 Stroke length 70 Die height 245 Slide adjustment amount 60 Slide dimensions 400 x 350 Bolster dimensions 800 x 450 With light safety
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
80T Press (Bridge) | AMADA | TPL80SI | 2001 |
S:180, DH350, 40-70spm, Adj80 (electric), S550×450, B1030×600
|
Osaka Prefecture |
SK Machine Co., Ltd.
|
Details |
|
Table spot welding machine | AMADA | TS-2 | 2004 |
Three-phase 200V H12,000A V13,000A Table dimensions 2000 x 1000mm The photo shows the unit in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Table spot welding machine | AMADA | TS55i |
Three-phase 200V 50/60Hz Maximum short circuit current 16000A Table dimensions 500 x 500mm The photo shows the product in an uncleaned state.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Contour machine | AMADA | V-300 | 1972 |
Maximum thickness 150, maximum depth 300
|
Osaka |
Kei-Machine Co.,Ltd.
|
Details |
|
Contour machine | AMADA | V-300 | 1979 | MIE |
KOWA MACHINERY CO.,LTD
|
Details | |
|
Contour machine | AMADA | V-300 | 1979 |
◆200V 3-phase 50/60Hz ◆SAW MOTOR: 0.75kw x 4P ◆50/60Hz ◆GRINDER MOTOR: 0.04kw x 2P ◆Weight: 250kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Contour machine | AMADA | V-300 | Unknown | MIE |
KOWA MACHINERY CO.,LTD
|
Details | |
|
Contour machine | AMADA | V-400 | 1981 |
◆Cutting capacity: W400×H250mm ◆Saw blade dimensions: W4-13×t0.9×L3375-3535mm ◆Saw blade speed: 15-90m/min. ◆Permissible load weight: 150kg ◆Table inclination: 5° (front and back) ◆Main motor: 1.5-4kW-P ◆Machine dimensions: W994×D695×H1955mm ◆Machine weight: 600kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Contour machine | AMADA | V-400 | 1969 |
Table: 600x580★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |