671 entries, 1~16 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
NC Surface Grinder | AMADA | WASINO TSD3 | 2008 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Vertical Milling Machine | AMADA | AM103 | 1986 |
Table: 1050×300★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | AMADA | SG-64F | 1985 |
No.197-0-0119★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Dresser | AMADA | RD-30 | Unknown |
R dresser range: convex R0-30mm concave R0.5-30mm, angle dresser range: 360°, minimum angle reading scale: 5', maximum travel distance from center: right 30mm left 30mm (maximum travel distance left and right: 60mm), maximum grindstone diameter: φ255mm, center height: 80mm★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Dresser | AMADA | RD-30 | Unknown |
★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Others | AMADA | SSR-5 | Unknown |
★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Band Saw | AMADA | HA-250 | 1995 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Band Saw | AMADA | HFA-400 | 1991 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Band Saw | AMADA | HFA-300 | 1995 |
Cutting capacity: Φ330, 330x330, saw blade speed: 15-120m/min★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Contour Machine | AMADA | VA-400 | 1991 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Contour Machine | AMADA | V-400 | 1970 |
Table dimensions: 600x580mm★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Contour Machine | AMADA | V-400 | 1973 |
AC:200V Table:600x580mm ★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Contour Machine | AMADA | V-400 | 1969 |
Table: 600x580★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Press | AMADA | SPH-60 | 1980 |
◆Pressure capacity: 588kN ◆Bending length: 835mm ◆Maximum stroke length: 150mm ◆Descent speed: 35-50mm/s ◆Pressure speed 50Hz low speed: 9mm/s, high speed: 18mm/s ◆Pressure speed 60Hz low speed: 10.8mm/s, high speed: 21.6mm/s ◆Ascension speed 50Hz: 59mm/s, 60Hz: 70.8mm/s ◆Frame gap: 510mm ◆Motor: 5.5kw ◆Oil capacity: 87L ◆Machine weight: 4.86t _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Tool Grinder | AMADA | DP-32 | 1989 |
◆Drill diameter that can be ground: 3 to 32mm ◆Tip angle: 80° to 180° ◆Grinding wheel: 180×25×25.4 max 2000r/m ◆200V 3 phase ◆50/60Hz ◆MOTOR: 0.4kw ◆Weight: 145kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
C-Frame Press | AMADA | TP-35FX | 2019 |
◆Pressure capacity: 350kN ◆Stroke length: 110? ◆Capacity generating position: 5.5? ◆Strokes per minute: 60-100min-1 ◆Die height: 250? ◆Slide adjustment amount: 55? ◆Slide underside dimensions: (LR×FB): 350×300? ◆Bolster dimensions (LR×FB): 700×400 ◆Height: 2425? ◆Mass: 2600kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |