1037 entries, 33~48 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Others | 不明 | 直径130 | Unknown | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
Others | 不明 | 直径300 | Unknown |
◆Direct mounting type_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Others | 不明 | 直径230 | Unknown | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
Others | 不明 | コレット22m/m | Unknown | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
Others | フジジコウ | FA200×500 | Unknown |
◆If there is a difference between the polishing specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Vertical Milling Machine | 遠州 | VF | Unknown |
◆XYZ: 700×240×410mm ◆Table: 1300×270mm ◆Spindle NST No.50 ◆56-1503rpm ◆From spindle end to table surface: 0-410mm ◆Column sliding surface width: 280mm ◆Spindle motor: 4P×3.7kw ◆Machine dimensions: W2365×D2150×H1850mm ◆Weight: 2.4T _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Grinding Wheel/Flange | 各種 | 7箱 | Unknown |
[7 boxes] Nitolex: D175×T35×H76.20×10M×2 TAIYOTOOL angular cutter: 100×35×25.4 Nippon Hard Metal Nagoya Diamond: 33.0D×W3.0×9.0U T12.70 H6 Sankyu Diamond: 75.0φ×T30.0×W3.0×3.0×H12.70 Sankyu Diamond: 70.0φ×T10.0××3.0×H12.70 Allied Material (flare cup): φ75×3W-3X-12.7H In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | TSUGAMI | T-SPL1 | Unknown |
◆Chuck 6 inch three jaws◆Swing above bed: 320 ◆Swing above carriage: 160 ◆Swing above cut-off: None◆Center distance: 750-800 ◆Spindle through hole diameter: 35 ◆125-3000 rpm ◆8-point stopper_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | MORI SEIKI | MR-1000G | Unknown |
[Video__ available. Check it out below! ] ◆7-inch 3-jaw hollow chuck ◆Center distance: 1000 ◆Swing above bed: 520mm ◆Rotation speed: 28-1350rpm ◆XYZ: 300×150×170 ◆Taper: MT No.5 ◆Bed width: 420 ◆Cut-off width (from face plate): 250 ◆Total bed length: 2205 ◆Spindle motor: 5.5kw 4P ◆Weight: 2570kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
|
Lathe | MORI SEIKI | MS-850 | Unknown |
◆Swing above the bed: 435mm ◆Swing between 180mm from the face plate: 490mm ◆Swing above the cross feed table: 250mm ◆Distance from floor to spindle center: 1075mm ◆Distance from bed to spindle center: 215mm ◆Maximum distance between both centers: 850mm ◆Spindle nose: JIS A-6 ◆Spindle through hole: 52mm ◆Sleeve taper: MT6 ◆Center taper: MT4 ◆Spindle speed conversion number: 12 ◆Spindle rotation speed: 32-1800min ◆Lead screw: Φ31.75 T-shaped screw 4 teeth/inch or 6mm ◆Inch screw: 80-4 teeth/inch ◆Millimeter screw: 0.25-7mm ◆DP screw: 112-8 ◆Module screw: 0.5-3.5 ◆Cross feed table travel distance: 255mm ◆Double tool rest travel distance: 150mm ◆Maximum tool angle (X×Y): 25×25mm ◆Tailstock shaft travel distance: 150mm ◆Center taper: MT4 ◆Bed top width: 352mm ◆Total bed length: 1880mm ◆Spindle motor: 3.7_(5L) 4P ◆Coolant pump motor: 100W 2P ◆Weight: 1800W _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | 滝澤 | TSL-550D | Unknown |
◆KITAGAWA JN07 3-jaw chuck◆Swing above bed: 360mm ◆Swing above carriage: 210mm ◆Maximum distance between centers: 550mm ◆Total bed length: 1360mm ◆Bed width: 275mm ◆Spindle taper: MT No.5 ◆Spindle hole diameter: 35mm ◆Weight: 800kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | YAMAZAKIIRON WORKS | REX770×1500 | Unknown |
◆800φ chuck◆Swing over bed: 770 ◆Swing over carriage: 530 ◆Maximum distance between centers: 1525 ◆Spindle hole: American standard taper #450 ◆Spindle rotation speed: 12-1200 rpm ◆Maximum tool post travel: 250 ◆Bed (width x total length): 560 x 3226 mm ◆Machine (total width x total length): 1380 x 3643 mm ◆Machine weight: 4000 kg *With scale_In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Rotary | 津田駒 | φ190 | Unknown |
◆φ190 _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Rotary | 津田駒 | 300-CTK | Unknown | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
Vertical Milling Machine | OKK | MH-2V | Unknown |
◆XYZ: 720×260×360 ◆Spindle end to table top: 80 to 440 ◆Spindle center to column front: 310 ◆Table dimensions: 1310×300 ◆Number and dimensions of table grooves: 3×18HB ◆Maximum load weight: 500kg ◆Spindle rotation speed (number of conversions): 60 to 1800 (12) ◆Table left/right and front/back: 10 to 1650mm/min
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Rotary | DAIWA | φ165 | Unknown |
◆φ165 _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |