5278 entries, 4929~4944 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Rotary Grinder | Sanshinseiki | SPG-600Ⅱ | 1986 |
★
|
Yamanashi Prefecture |
TokyoEngineering
|
Details |
|
Radial Drilling Machine | 池田 | RMA-1500 | 1986 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Cylindrical Grinder | MIG-MG-200 | 1986 |
Table swing: 170mm Center distance: 200mm Maximum grinding diameter: 60mm Grinding wheel size: 205x13(25)x50.8mm Grinding wheel speed: 3100rpm Swivel angle: ±30° Manual feed travel distance: 95mm Headstock swivel angle: ±45° Spindle speed: Maximum 800rpm Center taper: MT No.1 Tailstock travel distance: 15mm Tailstock center taper: MT No.1 Table swivel angle: ±10° Table handle feed amount: 200mm★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Cutting Machine | HEIWA TECHNICA | ファインカット | 1986 |
Work table movement: Cutting direction: 240mm, left and right direction: 110mm, up and down direction: 250mm, spindle speed: 3000rpm, cutting wheel dimensions: φ230×0.6〜1.0×25.4★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Lathe | MORI SEIKI | MR-1000 | 1986 |
Rotation speed: 28 to 1350 rpm, Chuck: Three-jaw φ235, Hole diameter φ70, Through hole diameter: φ52, Swing: Bed-mounted φ480, Tool holder φ280, Center distance: 1000, Made by Mitutoyo (PM-12L) with counter (2 axes) ★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Cutting Machine | TSUNE SEIKI | RKA-62 | 1986 |
Automatic high-speed bundle cutter (for non-ferrous materials) Saw blade rotation speed: 57 rpm (high speed), cutting length: 8-595 Remnant length: 90- (90+cutting excess) Round: 5-40 ◎: 5-50 □: 5-40 Times: 5-50 Input power supply: 3-phase AC200/220V★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Powder Molding Press | 200tプレス | 1986 |
Capacity: 200t, Stroke: 500, Open height: 1500, Slide table: 800x450, Lower table: 800x800★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-63AN | 1986 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Others | VD-250 | 1986 |
Through type, grinding wheel diameter φ250★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Others | VD-350 | 1986 |
Grindstone rotation speed: 1450 rpm, Grindstone dimensions: φ350 x 50 x φ170 (inner diameter), Workpiece dimensions: 5-60 (W) x 5-60 (L) x 2-12 (H)★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-63AN | 1986 |
#3876★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Lappers | JND9B-8P-4D | 1986 |
4 motors, 4 ways, DP12, 8 carriers, water cooling mechanism for upper and lower plates, I gear/S gear SUS specification★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Internal Grinder | TOYODA MACHINE WORKS | GH40-100 | 1986 |
Swing: 400mm Chuck cover inner swing: 360mm Distance between chuck front and spindle end face: Maximum 1139mm Spindle taper: MTNo.3 Internal grinding spindle speed: 9000rpm (50Hz) 12000rpm (60Hz) Spindle speed: 20-300rpm Headstock taper: MTNo.5 Table diameter: 1055mm End face spindle speed: 3400rpm ★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Others | ISP L5 | 1986 |
★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
Lathe | Dainichi Machinery | DLG-SH 63x150 | 1986 |
Rotation speed: 12.5~1120rpm (14 stages) 3-jaw chuck size: 12 inches Bed swing: 630mm Reciprocating table swing: 400mm Maximum distance between centers: 1500mm Spindle through hole diameter: φ54 Side feed table travel distance: 380mm Top feed table travel distance: 200mm Tailstock shaft travel distance: 200mm Tailstock shaft taper hole: Morse taper No. 5 Bed length 2900mm Bed width: 425mm Main motor: 7.5kw 4P★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Lappers | SK-2F | 1986 |
6 axes, φ350 plate, weight pressure, axis distance 540, 1 motor★
|
Yamanashi Prefecture |
TokyoEngineering
|
Details |