5278 entries, 4817~4832 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Forming Grinder | Okamoto Machine Tool Works | PFG-450DXC | 1999 |
Sine bar chuck: 350 x 100 (angle up to 100 degrees), 2-axis counter (Y, Z axis), automatic left and right, manual front and back/up and down, grinding wheel: Φ180 x Φ31.75, rotation speed: 2850/3420 rpm (50 Hz/60 Hz), wet type★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | JONES-SHIPMAN | 540AP | 1979 |
Magnetic chuck: 300 x 150 x 85★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | 540AP | 1979 |
Magnetic chuck: 250 x 110 x 110★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Forming Grinder | AMADA | SG-64F | 1985 |
No.197-0-0119★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-52BN | 1988 |
No.7727★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-63AN | 1986 |
#3876★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | NAGASE INTEGREX | SGW-75 | 1996 |
Chuck dimensions: 700x500mm, Table travel: 830x590mm, Automatic vertical infeed: 0.002~0.03mm, Grindstone dimensions: φ355(50Hz)/φ305(60Hz)x38xφ127mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-63AN | 1986 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | ICHIKAWA GRINDER MFG | ICS-1550 | 1978 |
TEN OH carried out in 2006, zipper: 500 x 1500★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Forming Grinder | Okamoto Machine Tool Works | PSG-52C | 1979 |
Rotation speed: 3000 rpm, Grindstone diameter: φ205 x 19 x φ50.8 (inner diameter), Tilting chuck: 400 x 100★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Internal Grinder | TOYO | SL5-005 | Unknown |
Supported methods: One-pass method & Mandrel method, Machining diameter: One-pass method φ3 to φ30 / Mandrel method φ4 to φ40, Spindle speed: 400 to 1400 rpm, Spindle stroke: 250 mm, Motor: 0.75 kW x 4P for spindle / 0.04 kW for spindle feed, Machine dimensions: Width 1130 mm x Depth 850 mm x Height 2000 to 2410 mm, Machine weight: 650 kg, Power supply: 3-phase AC 200 V 4 KVA ★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Internal Grinder | 大隈鉄工所 | GI-20M | 1985 |
Three-jaw chuck size: φ230 Grindable hole diameter: φ10-200 Grindable hole length: 200mm Maximum workpiece length: 400mm Table top swing: φ540mm Cover inside swing: 300mm Spindle speed: 50-660 (50Hz) 60-800 (60Hz) rpm Headstock through hole diameter: φ37 Table travel: 480mm CS specifications ★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Vertical Milling Machine | WASINO ENIGINEERING | AM103 | 1990 |
Table: 1050 x 300, 2-axis counter (left/right, front/back), spindle inverter★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Lathe | MORI SEIKI | MR-1500G | 1979 |
Rotation speed: 28 to 1350 rpm, Chuck: Three-jaw φ270, Hole diameter φ58, Through hole diameter: φ52, Center distance: 1500, Swing: Bed top φ560 Tool rest φ270★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Lathe | MORI SEIKI | MR-1000 | 1986 |
Rotation speed: 28 to 1350 rpm, Chuck: Three-jaw φ235, Hole diameter φ70, Through hole diameter: φ52, Swing: Bed-mounted φ480, Tool holder φ280, Center distance: 1000, Made by Mitutoyo (PM-12L) with counter (2 axes) ★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Lathe | 山崎マザック | MAZAK-ACE | Unknown |
Rotation speed: 39 to 1500 rpm, Chuck: Three jaws φ200, Hole diameter φ50, Swing: Bed top φ460 Tool holder φ200★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |