45479 entries, 753~768 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Desktop Lathe | 江黒 | LB6 | 1997 |
Collet type, center distance 200mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Compressor | 旭ポンプ製作所 | 1997 |
Capacity: 400L Maximum pressure: 9.9kgf/㎠ Water pressure test: 14.9kgf/㎠
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Cutting Machine | HEIWA TECHNICA | TYPE 31 | 1997 |
100V without cutting pump
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Lathe | 滝沢 | TAL-560 | 1996 |
9-inch 3-jaw scroll chuck, center distance 1500, rotation 25-1500 rpm, through hole diameter 76, bed swing 560, carriage swing 340, with cut-off
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
NC Lathe | Dainichi Machinery | DL65×200 | 1996 |
FANUC20-T φ450.4 jaw single action chuck, spindle through hole diameter 85, center distance 2000, stroke X380, Z2000, swing above bed 650
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
C-Frame Press | ワシノ | PUX35 | 1996 |
35t Stroke number 45-80 Stroke length 80 Die height 220 Slide adjustment amount 55 Slide bottom dimensions 350 x 300 Bolster dimensions 700 x 400 With light safety
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Forming Grinder | KURODA SEIKO | GS-BMH | 1996 |
Chuck size 380 x 110 With left and right feed With up and down fast feed With front and rear digital scale
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Press Brake/Bender | AMADA | RG-100S | 1996 |
100t Stroke length 100 Table length 2500 Gap depth 400 Open height 370 Auto back gauge Machine weight 6.0t
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Lathe | 滝沢 | TSL-550D | 1996 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Tool Presetter | 日本ＩＤシステム | TP-300N | 1996 |
Stroke for BT50 X400mm Z450mm Projection type
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
NC Surface Grinder | 岡本工作 | PSG-64EX | 1996 |
★Test cut was carried out! (Photos are now available)
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Vertical Milling Machine | OKK | MH-2V | 1996 |
NT50 Table size 1310 x 300 Spindle speed 60-1800 rpm Stroke X720 Y260 Z360 3-axis feed 3-axis digital scale
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
|
NCAuto-Lathe | MORI SEIKI | SL-150SMC | 1996 |
MSC-518 (FANUC) Main: 6-inch 3-jaw chuck Sub: 5-inch 3-jaw chuck 12-corner turret With parts catcher With tool presetter With right-side chip converter Auto bar 2.5m specification (Alps/PF-V3SⅡ/2019)
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Lathe | 滝沢 | TSL-550D | 1996 |
7 inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
NC Vertical Milling Machine | TAKEDA MACHINE TOOLS | RT-VS2N-EG | 1996 |
FANUC20-F NT50 Table size 1200 x 320 Spindle speed 35-1720 rpm Stroke X850 Y420 Z450
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
NC Lathe | Nakamura-Tome | TMC-30C | 1996 |
FANUC Four-sided chuck (Koyo/HSR-225) 12-sided turret
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |