12-inch 3-jaw scroll chuck, spindle through hole diameter 84, spindle speed 12.5-1120 rpm, center distance 1000, swing above bed 630, swing above carriage 400, with 2-axis digital scale

9-inch 3-jaw scroll chuck (Kitagawa/JN09T) with 2-axis digital scale

Spindle diameter 52 Spindle speed 25-1500 rpm Center distance 800 Swing above bed 460 Swing above tool table 250

NT40 Table size 1100 x 280 Spindle speed 75-3600 rpm With left and right feed, up and down fast feed, XY digital scale

NT40 Table size 1100 x 250 Spindle speed 4000 rpm Stroke X550 Y250 Z350 With left and right feed With XY digital scale

4.5×2500 Electric clearance Auto back gauge Air support

NT40 Table size 1100×250 Spindle speed 80-4000rpm Stroke: X550 Y250 Z350 With up and down feed With XY axis digital scale Spindle inverter control

Single phase 100V Weight 32kg With strong/weak/cool air switch

10t Table length 300 Stroke 100 Maximum opening 260 Frame gap 150 Side frame interval 320

NT40 Table size 1100 x 250 Spindle speed 75-4000 rpm

Grindstone rotation speed: 3800 rpm

Three-phase 200V 50/60Hz Table dimensions: 560 x 570mm Table travel: 60mm (front/back) 25mm (left/right) Distance from back of arbor to column: 345mm Maximum workpiece height: 130mm Minimum workpiece inner diameter: φ8 Table centre hole diameter: φ180 Through hole diameter φ150 Keyway machining width: 3-20mm Piston stroke: 150mm *The photo shows the product in an uncleaned condition.

3t Stroke 150mm Open height 280mm Shank hole φ20 x 40 Bolster dimensions 350 x 240mm Maximum lowering speed 100mm/sec Maximum stop time 180ms Three-phase 200V 0.75kw The photo shows the machine in an uncleaned condition.

7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.