80 entries, 65~80 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
C-Frame Press | アイダ | NC1-110(2) | 1992 |
110t Stroke number 35-65 Stroke length 180 Die height 350 Slide adjustment amount 90 With light relief With die cushion
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | アイダ | NC1-110(2) | 1989 |
110t Stroke number 50 Stroke length 180 Die height 350 Slide adjustment amount 90 With light stabilizer
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | AMADA | TP-15C-X | 1988 |
15t Stroke number 120 Stroke length 60 Die height 200 Slide adjustment amount 40 Slide dimensions 220 x 150 Bolster dimensions 550 x 300 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | Komatsu | PUX-45 | 1986 | Gunma |
Aim.SSK Co.,Ltd.
|
Details | |
|
C-Frame Press | アイダ | NC1-80（2） | 1991 |
◆Pressure capacity: 80t ◆Stroke length: 160mm ◆Continuous strokes without load: 40-75spm ◆Die height: 310mm ◆Slide adjustment: 80mm *With optical safety device *Without die cushion *With small mount
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
C-Frame Press | AMADA | TP60-SIL | 1996 |
◆Pressure capacity: 60t ◆Stroke number: 40-75spm ◆Stroke length: 180mm ◆Slide adjustment amount: 70mm ◆Slide bottom surface dimensions (left/right x front/back): 500 x 600mm ◆Bolster dimensions (left/right x front/back): 920 x 980mm ◆Die height: 315mm ◆Main motor: 5.5KW ◆Air pressure used: 5.0kgf/cm2 ◆Emergency stop time: 170ms ◆Setting position of overrun monitoring device: 15deg ◆Machine size: W1000 x D1725 x H2615mm ◆Machine weight: 6.2T
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
C-Frame Press | AMADA | TP-35FX | 2019 |
◆Pressure capacity: 350kN ◆Stroke length: 110? ◆Capacity generating position: 5.5? ◆Strokes per minute: 60-100min-1 ◆Die height: 250? ◆Slide adjustment amount: 55? ◆Slide underside dimensions: (LR×FB): 350×300? ◆Bolster dimensions (LR×FB): 700×400 ◆Height: 2425? ◆Mass: 2600kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
C-Frame Press | ワシノ | PUX15KRD | 1989 |
15t Stroke number 120 Stroke length 60 Die height 200 Slide adjustment amount 40 Slide dimensions 220 x 150 Bolster dimensions 500 x 300 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | AIDA ENGINEERING | PC-30(1) | 1987 |
Pressure capacity: 30tf Stroke length: 80mm Die height: 200mm Slide adjustment amount: 55mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | 矢崎工機 | KAM-MARKII | 1977 | Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
C-Frame Press | DOBBY | 30020 | 1981 |
20T ST30mm 100-350spm Die height 205mm Slide adjustment amount 50mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | 30020 | 1982 |
20T ST30mm 100-350spm Die height 205mm Slide adjustment amount 50mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
C-Frame Press | 遠藤プレス | BPA-25 | 1980 |
Capacity: 25t, Stroke number: 120spm, Stroke length: 100, Slide bottom area: 170x155, Bolster area: 600x350, Shank diameter: 31.75, Motor: 1.5kw6P★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | 浅倉 | H2.5 | Unknown |
7t, table 500×240mm★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
C-Frame Press | YAMADA DOBBY | SP-15CS-E | 1983 |
15t, stroke: 30mm, 300rpm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | AMADA | TP-25C | 1988 |
25t Stroke number 120 Stroke length 50 Die height 190 Slide adjustment amount 50 Slide dimensions 250 x 200 Bolster dimensions 550 x 300 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |