266 entries, 177~192 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Hydraulic Press | JAM | HYP305H | 2007 |
[High speed type] ◆ Pressure capacity: 29.4kN ◆ Stroke length: 30 to 150mm ◆ Ram descent speed: 318mm/sec ◆ Ram ascent speed: 274.0mm/sec ◆ Operating pressure range: 35.4 to 106 ◆ Open height: 280mm ◆ Bolster: 350×240×30mm ◆ Shank hole: φ20×40 ◆ Motor output: 0.75kw ◆ Weight: 350kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Hydraulic Press | JAM | HYP305H | 2008 |
[High speed type] ◆ Pressure capacity: 29.4kN ◆ Stroke length: 30 to 150mm ◆ Ram descent speed: 318mm/sec ◆ Ram ascent speed: 274.0mm/sec ◆ Operating pressure range: 35.4 to 106 ◆ Open height: 280mm ◆ Bolster: 350×240×30mm ◆ Shank hole: φ20×40 ◆ Motor output: 0.75kw ◆ Weight: 350kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Hydraulic Press | JAM | HYP305H | 2008 |
[High speed type] ◆ Pressure capacity: 29.4kN ◆ Stroke length: 30 to 150mm ◆ Ram descent speed: 318mm/sec ◆ Ram ascent speed: 274.0mm/sec ◆ Operating pressure range: 35.4 to 106 ◆ Open height: 280mm ◆ Bolster: 350×240×30mm ◆ Shank hole: φ20×40 ◆ Motor output: 0.75kw ◆ Weight: 350kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Hydraulic Press | JAM | HYP1000 | 2007 |
◆High speed type◆Pressure capacity: 4-10 ◆Stroke length: 30-200 ◆Ram descent speed: 260 ◆Ram pressurization speed: 19.3 ◆Ram ascent speed: 219.0 ◆Operating pressure range: 42.4-106 ◆Open height: 359 ◆Shank hole: Φ32×60 ◆Power supply: 3Φ, AC200V, 10A ◆Motor output: 1.5 ◆Stroke type: Cut, inching, one safety stroke ◆Operation method: Two-handed operation ◆Working oil capacity: 35 ◆Body weight: 800 _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Hydraulic Press | 連傑油圧工業股_有限公司 | LDO-150-20-1200×1000 | 2025 |
[Eco servo specifications] ◆ Capacity: 25-150t ◆ Lifting capacity: 11t ◆ Table: 1200 x 1000 ◆ Stroke: 800cc ◆ Daylight: 1000cc ◆ Maximum mold weight: 2t ◆ Die cushion capacity: 8-20t ◆ Die cushion stroke: 150cc ◆ Cushion pin diameter: φ34.5cc ◆ Cushion pins: 4 ◆ Table height (from FL): 1100cc ◆ Voltage: 200V ◆ Tank capacity: 800L _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Other | AMADA | SP-30 | 1981 |
◆Pressure: 29 tons ◆Stroke length: 78 mm ◆Daylight: 290 mm ◆Power supply: 200/220V 3 phase 50/60Hz ◆Motor: 5.5KW ◆Maximum operating oil pressure: 180kg/cm2 ◆Tank capacity: 72L ◆Machine weight: 1.5 tons _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Other | Sick | 1式 | Unknown |
?[Receiver: M20E-PU3H1103] *The long item in the photo is built-in unit: Type M20E-02250A222 ?[Floodlight: M20S-PU3H9603] *The short item in the photo is built-in unit: Type M20S-02250A122 ??? Light in weight 2040593 _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Hydraulic Press | 鈴木鉄工所 | BCS-30-L | 1992 |
30t Slide dimensions 800 x 600 Bolster dimensions 800 x 600 Stroke length 550 Open height 950 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | AMADA | TP-25C | 1988 |
25t Stroke number 120 Stroke length 50 Die height 190 Slide adjustment amount 50 Slide dimensions 250 x 200 Bolster dimensions 550 x 300 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | ワシノ | PUX15KRD | 1989 |
15t Stroke number 120 Stroke length 60 Die height 200 Slide adjustment amount 40 Slide dimensions 220 x 150 Bolster dimensions 500 x 300 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | AIDA ENGINEERING | PC-30(1) | 1987 |
Pressure capacity: 30tf Stroke length: 80mm Die height: 200mm Slide adjustment amount: 55mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | 矢崎工機 | KAM-MARKII | 1977 | Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
C-Frame Press | DOBBY | 30020 | 1981 |
20T ST30mm 100-350spm Die height 205mm Slide adjustment amount 50mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | 30020 | 1982 |
20T ST30mm 100-350spm Die height 205mm Slide adjustment amount 50mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
C-Frame Press | 遠藤プレス | BPA-25 | 1980 |
Capacity: 25t, Stroke number: 120spm, Stroke length: 100, Slide bottom area: 170x155, Bolster area: 600x350, Shank diameter: 31.75, Motor: 1.5kw6P★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | 浅倉 | H2.5 | Unknown |
7t, table 500×240mm★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |