383 entries, 273~288 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Other | AMADA | SP-30 | 1981 |
◆Pressure: 29 tons ◆Stroke length: 78 mm ◆Daylight: 290 mm ◆Power supply: 200/220V 3 phase 50/60Hz ◆Motor: 5.5KW ◆Maximum operating oil pressure: 180kg/cm2 ◆Tank capacity: 72L ◆Machine weight: 1.5 tons _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Other | Sick | 1式 | Unknown |
?[Receiver: M20E-PU3H1103] *The long item in the photo is built-in unit: Type M20E-02250A222 ?[Floodlight: M20S-PU3H9603] *The short item in the photo is built-in unit: Type M20S-02250A122 ??? Light in weight 2040593 _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Hydraulic Press | 鈴木鉄工所 | BCS-30-L | 1992 |
30t Slide dimensions 800 x 600 Bolster dimensions 800 x 600 Stroke length 550 Open height 950 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | AMADA | TP-25C | 1988 |
25t Stroke number 120 Stroke length 50 Die height 190 Slide adjustment amount 50 Slide dimensions 250 x 200 Bolster dimensions 550 x 300 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | ワシノ | PUX15KRD | 1989 |
15t Stroke number 120 Stroke length 60 Die height 200 Slide adjustment amount 40 Slide dimensions 220 x 150 Bolster dimensions 500 x 300 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | AIDA ENGINEERING | PC-30(1) | 1987 |
Pressure capacity: 30tf Stroke length: 80mm Die height: 200mm Slide adjustment amount: 55mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | 矢崎工機 | KAM-MARKII | 1977 | Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
C-Frame Press | DOBBY | 30020 | 1981 |
20T ST30mm 100-350spm Die height 205mm Slide adjustment amount 50mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | 30020 | 1982 |
20T ST30mm 100-350spm Die height 205mm Slide adjustment amount 50mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
C-Frame Press | 遠藤プレス | BPA-25 | 1980 |
Capacity: 25t, Stroke number: 120spm, Stroke length: 100, Slide bottom area: 170x155, Bolster area: 600x350, Shank diameter: 31.75, Motor: 1.5kw6P★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
C-Frame Press | 浅倉 | H2.5 | Unknown |
7t, table 500×240mm★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
C-Frame Press | YAMADA DOBBY | SP-15CS-E | 1983 |
15t, stroke: 30mm, 300rpm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
High-Speed Press | YAMADA DOBBY | FIT-3-0150 | 2012 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Hydraulic Press | JAM | HYP-505H | 1991 |
Capacity 5t. Stroke length 150mm. Open height 285mm. Bolster dimensions 400 x 340mm. Shank hole φ25 x 60mm 3-phase 200V 1.5kW
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Hydraulic Press | ヤマシナ | SHP-200 | 1999 |
200t Slide dimensions 1200 x 900 Bolster dimensions 1200 x 1000 Stroke length 600 Open height 800 With diversion
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Hydraulic Press | アサイ | HFB100P | 2009 |
30-100t Stroke length 300 Daylight 500 Slide dimensions 800 x 630 (630 x 390) Bolster dimensions 800 x 630 (630 x 390) with cushion
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |