120 entries, 65~80 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
NC Cylindrical Grinder | Okuma | GP-44N×100S（大径用） | 1991 |
◆OSP-5020G ◆Center distance: 1000mm ◆Table swing: φ430 ◆Maximum grinding diameter: φ400 ◆Frequency speed of grinding wheel: 2700m/min ◆XZ: 295×1210mm ◆Headstock center taper: MT No.3 ◆C-axis rotation speed: 25~600rpm ◆Tailstock center taper: MT No.5 ◆Required floor space: 4637.5×3321mm ◆Weight: 5,600kg
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
NCInternal Grinder | Toyo Advanced Technologies | T-11JAS | 2007 |
◆TOYOMATIC4000 ◆KITAGAWA IC-10 chuck ◆Table swing: φ600 ◆Spindle speed: 100-800r/min ◆Spindle swivel angle: -1 to 15 degrees ◆Table stroke: 500mm ◆Cutting travel amount (forward side) 110mm (backward side) 60mm ◆Grinding method: NC oscillation & plunge grinding ◆Simultaneous control axes (2 axes) ◆Weight: 2T *Separate tank (BUNRI AUTO-20) _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
NC Surface Grinder | Okamoto Machine Tool Works | PSG-63CA3 | 2019 |
FANUC 0i-MF, left/right, up/down, front/back simultaneous 2-axis/3-axis control, rotation speed: 500-2500rpm, table travel: 750x340, grinding wheel diameter: φ350ｘ38ｘφ127 (inner diameter), rotary dresser★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NC Surface Grinder | WASINO | MEISTER | 1999 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NC Surface Grinder | AMADA MACHINE TOOLS | TS-52 | 2015 |
TECHSTER-52, Chuck size: 250x125, Grindstone size: φ255×6.4〜25×φ50.8, Frequency: 60Hz, 3-axis NC★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NC Surface Grinder | AMADA | WASINO TSD3 | 2008 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NC Surface Grinder | NAGASHIMA SEIKO | NX640-NC | 1996 |
Table: 600X400X80(H)★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NC Surface Grinder | NAGASHIMA SEIKO | NAS-520NC13 | 1990 |
Zipper: 500 x 200 x 100 (H)
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NC Surface Grinder | Mitsui High-tec | MSG-618PC-NC | 2007 |
Chuck size 350 x 150 Grindstone rotation speed 4000 rpm ★ Test cut was carried out! (Photos are available)
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
NC Surface Grinder | 岡本工作 | PFG500DXNCSⅡ | 2008 |
FANUC21i-MB Chuck size 350 x 150 Grindstone size 205 x 32 x 31.75
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
NC Surface Grinder | 岡本工作 | PSG-52DXNC | 1998 |
FANUC0-M Chuck size 500 x 200 with magnet separator
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
NC Surface Grinder | KURODA SEIKO | GS-63NC | 1992 |
FANUC0M-C Chuck size 600 x 300 Stroke: X720 Y340 Z340 Grindstone outer diameter Φ455 x width 50 x inner diameter Φ127 Grindstone rotation speed 1460 rpm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
NC Surface Grinder | HITACHI SEIKO | GHL-NB409M | 1995 |
FANUC0-M Chuck size 800 x 400
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
NCRotary Grinder | TOKYO SEIKI KOSAKUSHO | TR-60NC | 2006 |
NC: FANUC-0iMC, table diameter: φ600★
|
Yamanashi Prefecture |
TokyoEngineering
|
Details |
|
NCRotary Grinder | 住重ファインテック | SVR60 | 2008 |
Table: Φ600 Hole: Φ30 Pitch: 13 (5+8) ★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NCRotary Grinder | Sanshinseiki | SPG-300CNC | 2007 |
Table: φ330 Hollow: φ30★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |