1008 entries, 593~608 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Forming Grinder | Mitsui High-tec | MSG-200M | 1991 |
Chuck size 270 x 125 with 1-axis digital scale (upper and lower)
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Forming Grinder | Mitsui High-tec | MSG-250M |
Chuck size 270 x 125 with 2-axis digital scale and dust collector
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Forming Grinder | NICCO MACHINE TOOL | NFG-515 | 1987 |
Chuck size 315 x 110 With front and rear digital scales With up and down fast forward With dust collector With upper dresser
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
|
Forming Grinder | 旭精機 | 515 | 1998 |
Chuck size 315 x 110 with left and right feed and 2-axis digital scale
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Forming Grinder | 旭精機 | 515 | 2000 |
Chuck 315 x 110 (Cyber Chuck/HSG-315LC) Spindle speed: 2940/3530 rpm (50/60 Hz) with dust collector
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Cylindrical Grinder | MIG-MG-200 | 1986 |
Table swing: 170mm Center distance: 200mm Maximum grinding diameter: 60mm Grinding wheel size: 205x13(25)x50.8mm Grinding wheel speed: 3100rpm Swivel angle: ±30° Manual feed travel distance: 95mm Headstock swivel angle: ±45° Spindle speed: Maximum 800rpm Center taper: MT No.1 Tailstock travel distance: 15mm Tailstock center taper: MT No.1 Table swivel angle: ±10° Table handle feed amount: 200mm★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Cylindrical Grinder | TSUGAMI | T-CGD150 | 1969 |
★.
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Cylindrical Grinder | SHIGIYA MACHINERY WORKS | GP-18・25H | 1982 |
★.
|
Kumamoto Prefecture |
TokyoEngineering
|
Details |
|
Cylindrical Grinder | 東京エンジニアリング | SRG-1500 | 2019 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Cylindrical Grinder | SHIGIYA MACHINERY WORKS | GP-30B･40ND | 1991 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Cylindrical Grinder | イマハシ | SSM-1 | Unknown |
Grindstone rotation speed: 1000-4000 rpm, Grindstone dimensions: Φ175×4×Φ31.75, Work shaft rotation speed: 20-125 rpm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Cylindrical Grinder | RG-3030NHV | 2007 |
Please see attached document★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Cylindrical Grinder | TOYODA MACHINE WORKS | Unknown |
GUP32 accessories★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
Cylindrical Grinder | 宇田川 | UR1-II | 1992 |
Workpiece diameter: φ3~120mm, Workpiece length: 60~150mm, Grindstone rotation speed: 3000rpm(50Hz), Grindstone outer diameter: 200mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Cylindrical Grinder | RG-80LNAH | 1996 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Cylindrical Grinder | TOYODA MACHINE WORKS | GUP32X100 | 1991 |
★
|
Yamanashi Prefecture |
TokyoEngineering
|
Details |