1~11 of 11 entries
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
TIG | Panasonic | YC-150TWX | 1996 |
It's a little old, so there are some scratches and stains, but it was used at a polishing shop and only occasionally, so it's in good condition due to low usage. I did a welding test and it worked well and can be used without any problems. The power supply is single-phase 200V, so it can be used even in places without a mains power source. Specifications: Rated input voltage: Single-phase 200V Rated input: 7.6KVA (5.5KW) Rated output current: DC 150A, AC 130A Rated usage rate: 40% Weight: 21kg Year of manufacture: 1996 Accessories: Air-cooled torch, gas meter, gas hose, base material cable, primary input cable (included with the unit), instruction manual
|
Osaka Prefecture |
Sinko Shoukai Ltd.
|
Details |
|
TIG | DAIHEN | DA-300P | 2016 |
Fully digital, AC/DC dual-purpose TIG welding machine, overhauled, water-cooled, full set,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
TIG | DAIHEN | DA-300P | 2011 |
AC/DC compatible, water-cooled, with water-cooling circulation device, full digital,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
TIG | DAIHEN | WB-A350P | 2018 |
Fully digital, AC/DC dual-purpose TIG welding machine, water-cooled, full set, overhauled, WellBe
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
TIG | PANASONIC | YC-300BP2 | 2006 |
Superb, digital inverter control type, AC/DC dual-purpose TIG welding machine, water-cooled full set, with water-cooled tank unit, YX-09KGC1, fully overhauled, fully serviced machine
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
TIG | PANASONIC | YC-300BP2 | 2006 |
Superb, Fully overhauled, Fully serviced, Operation check guaranteed, Digital inverter, Control type, AC/DC dual-purpose TIG welding machine, Air-cooled full set
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
TIG | PANASONIC | YC-300WX4 | 2004 |
AC/DC dual-purpose TIG welding machine, water-cooled, maintenance and inspection completed, new regulator, new earth, new water-cooled hose, Panasonic genuine tank included, water-cooled tank type YX-09KDA1,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
TIG | 松下電器 | YX-501A | Unknown | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
TIG | DAIHEN | AVP-300Ｐ(S-3) | 1996 |
- Rated input voltage: Three-phase 200/200V - Rated input current: 32/29A - Rated frequency: 50/60Hz - Rated output current: 300A - Output current range: (AC TIG) 10-100A, (DC TIG) 4-300A, (Manual welding) 10-250A - Weight: 56Kg ★
|
Kumamoto Prefecture |
TokyoEngineering
|
Details |
|
TIG | Mitsubishi Electric | AD-300KW | 1981 |
AC: 200V 50/60Hz 25.5kVA Output current: 300A Output voltage: 35V Weight: 150kg★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
TIG | YC-305TDK-7 | 1989 |
AC: 200V 28kVA 50Hz Rated load voltage: AC 22V DC 20V Rated output current: AC/DC 300A Maximum no-load voltage: AC 75V DC 106V Weight: 156kg
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |