129 entries, 17~32 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
YAG Laser | 日本ウェルディング | PLS-P30C | 2017 | Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details | |
|
Welding | DAIHEN | DT-303P(S-1) | 2019 |
300A 3-phase 200V 50/60Hz Rated load voltage 22V Rated duty 40% Weight 23kg
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Welding | DAIHEN | VRTPM-202(S-2) | 2015 |
Single phase 200V 200A Rated input 7.2kVA 4.9kw The photo shows the unit in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Welding | PANASONIC | YC-300WX3 | 2001 |
300A 3-phase 200/220V 10.5KVA Rated usage rate 40% Weight 74kg The photo shows the unit in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Spot | 大阪電研 | BA-25A | 2003 |
List price capacity: 25KVA, welding capacity φ2-7, constant current welding control device CA-100A (Miyaji Electronics)
|
Osaka Prefecture |
SK Machine Co., Ltd.
|
Details |
|
Welding | DAIHEN | VRTP-300(S-6) | 2017 |
Rated output current 300A, 3-phase 200V 50/60Hz, rated load voltage 20V, rated input 10.4kva 7.7kw, output current 4-300A, maximum no-load voltage 68V, weight 43kg, rated usage rate 40%. Water cooling unit/PU-301 (19kg)
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Welding | DAIHEN | AVP-300 | 1994 |
Three-phase 200V 50/60Hz Rated usage rate 40% Rated output current 300A Rated load voltage 32V Temperature rise 160° AC/DC compatible The photo shows the product in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Welding | PANASONIC | YC-200BL2 |
Single-phase 200V
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Welding | PANASONIC | YC-200TRCT00 | 2011 |
Three-phase 200V 50/60Hz Welding 200A Cutting 60A Rated input 12.1KVA The photo shows the unit in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
TIG | Panasonic | YC-150TWX | 1996 |
It's a little old, so there are some scratches and stains, but it was used at a polishing shop and only occasionally, so it's in good condition due to low usage. I did a welding test and it worked well and can be used without any problems. The power supply is single-phase 200V, so it can be used even in places without a mains power source. Specifications: Rated input voltage: Single-phase 200V Rated input: 7.6KVA (5.5KW) Rated output current: DC 150A, AC 130A Rated usage rate: 40% Weight: 21kg Year of manufacture: 1996 Accessories: Air-cooled torch, gas meter, gas hose, base material cable, primary input cable (included with the unit), instruction manual
|
Osaka Prefecture |
Sinko Shoukai Ltd.
|
Details |
|
Welding | Vision | LWI IV Flexx | 2001 |
50Hz 16A Table dimensions 400 x 460mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Welding | AMADA | TS-2 | 2004 |
Three-phase 200V H12,000A V13,000A Table dimensions 2000 x 1000mm The photo shows the unit in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Welding | DAIHEN | CPTM-1801 | 1989 |
Rated output current 180A Rated input voltage 3Vφ200V Rated no-load voltage 24V Rated frequency 50/60Hz Maximum no-load voltage 31V Rated input 6.2KVA 6.0KW Rated usage rate 40% Main unit 45kg The photo shows the unit in an uncleaned condition. No earth wire
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Arc | NATIONAL | YK-256F-2 | 1972 |
Rated primary input: 15.1KVA, 10.5KW Rated primary voltage: 200V Frequency: 60Hz Rated secondary current: 250A Capacitor capacity: 5.0KVA Capacitor voltage: 500V
|
Kumamoto Prefecture |
TokyoEngineering
|
Details |
|
Arc | PANASONIC | ARC180 | Unknown | Shizuoka Prefecture |
OTA YOSHIO MACHINE INDUSTRY CO.,LTD
|
Details | |
|
Arc | PANASONIC | PANA-ARC250 | Unknown | Shizuoka Prefecture |
OTA YOSHIO MACHINE INDUSTRY CO.,LTD
|
Details |