MAZATROL MATRIX2 BBT40 ATC 30 pieces Spindle speed 12000 rpm Table size 600 x 500 Stroke X450 Y850 Z550 B-120 to +90° C±360° Tool length measuring device included Touch sensor included Right-side chip capacitor included

Kobayashi Kikai Co.,Ltd.

AK TECHNOS CO., LTD.

Controller : OSP-P300M Table size: 1,000 x 460 mm Maximum load capacity: 700 kg Travel : X: 762 mm, Y: 460 mm, Z: 460 mm Distance between table and spindle nose : 150～610 mm 　　　　　 Spindle taper: BT40 (MAS-I) Spindle speed : 50～15,000 rpm ATC : 20 stations Required Floor space : 2,210 x 2,810 mm Machine height : 2,746 mm Machine weight : 6,300 kg Two internal coil conveyors (left and right, rear-mounted) 　　　　　 Cutting oil system (no chip conveyor) Cutting fluid cooling system (separate) 　　　　　 One-way positioning OSP suite Helical cutting Arbitrary angle chamfering

AK TECHNOS CO., LTD.

Kei-Machine Co.,Ltd.

OSP-P300M BT40 ATC20 Spindle speed 20000 rpm Table size 1000 x 460 Stroke X760 Y460 Z460 Data bank included

Kobayashi Kikai Co.,Ltd.

◆OSP-P300M-H ◆Spindle BBT40 ◆15000min-1 ◆Pull stat JIS type (for through spindle) ◆ATC32 *Chip conveyor (floor type) *In-machine chip disposal coil type *Through spindle coolant 1.5MPa *Shower cleaning device *Five tuning high spec *Absolute scale XYZ *Automatic tool length compensation automatic measurement (ONMP60) *Door interlock type? *OSP-P300M 3D-D *Touch probe available *Anti-crash system_If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers | x-travel: 560 mm | y-travel: 560 mm | z-travel: 660 mm | Control: M 730 BM MAPPS IV | distance spindle center to table: 80 - 640 mm | distance Spindlenose and center of table: 70 - 730 mm | max. spindle speed: 12.000 min/-1 | power capacity - main spindel: 15 / 11 kW | tool taper: SK 40 | spindle diameter in front bearing: 80 mm | numbers of pallets: 2 pos. | work height max.: 1.050 mm | size of pallet: 400 x 400 mm | max. workpiece weight: 400 kg | max. workpiecediameter: 630 mm | Max. workpiece - hight: 900 mm | B-Axis: 0,001 ° | Indexing-time 90°: 1,3 sec | change time of pallets: 8,0 sec | number of toolpositions: 60 pos. | max. tool diameter: 70 mm | max. tool-dia with free toolbox: 170 mm | max. tool length: 450 mm | max. tool weight: 8 kg | change-time tool to tool: 0,9 sec | change-time chip to chip: 2,8 - max. 9,9 sec | feed speeds: max. 60.000 mm/min | rapid traverse ( X / Y / Z ): 60 m/min | total power requirement: 35 kVA | weight of the machine ca.: 7,9 t | dimensions of the machine ca.: 5,5 x 3,5 x 2,6 m

Machine Tools Germany

M730UM (Meldas), T:1350*600, S:1050*530*510, 8000Rpm, ATC-30, In-machine measuring device, Through spindle coolant 1.5Mpa

Kinoshita Machinery Co., Ltd.

CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers | x-travel: 560 mm | y-travel: 560 mm | z-travel: 660 mm | Control: M 730 BM MAPPS IV | distance spindle center to table: 80 - 640 mm | distance Spindlenose and center of table: 70 - 730 mm | max. spindle speed: 12.000 min/-1 | power capacity - main spindel: 15 / 11 kW | tool taper: SK 40 | spindle diameter in front bearing: 80 mm | numbers of pallets: 2 pos. | work height max.: 1.050 mm | size of pallet: 400 x 400 mm | max. workpiece weight: 400 kg | max. workpiecediameter: 630 mm | Max. workpiece - hight: 900 mm | B-Axis: 0,001 ° | Indexing-time 90°: 1,3 sec | change time of pallets: 8,0 sec | number of toolpositions: 60 pos. | max. tool diameter: 70 mm | max. tool-dia with free toolbox: 170 mm | max. tool length: 450 mm | max. tool weight: 8 kg | change-time tool to tool: 0,9 sec | change-time chip to chip: 2,8 - max. 9,9 sec | feed speeds: max. 60.000 mm/min | rapid traverse ( X / Y / Z ): 60 m/min | total power requirement: 35 kVA | weight of the machine ca.: 7,9 t | dimensions of the machine ca.: 5,5 x 3,5 x 2,6 m

Machine Tools Germany

◆Control device: DCS-? (Based on F-31iMB5) ◆Effective distance between columns: 3000 ◆X-axis travel: 6250 ◆Y-axis travel: 3700+AACst.850 ◆Z-axis travel: 800 ◆W-axis travel: 1200 ◆Size of working surface: 5000×2500 ◆Allowable workpiece mass: 20000 ◆Rapid traverse speed X,Y-axis: 20m/min ◆Rapid traverse speed Z-axis: 12m/min ◆Rapid traverse speed W-axis (positioning only): 2.5/3.0(50/60?)m/min ◆Cutting feed speed, composite feed speed (X,Y,Z-axis) 1-15000mm/min ◆Individual feed speed X,Y-axis: 1-15000mm/min ◆Individual feed speed Z-axis: 1-12000mm/min ◆Motor for spindle: VAC37/30kw ◆Spindle ISO No.50 (2-sided constraint) ◆ATC 60 pieces ◆Chip conveyor 3 pieces type ◆Air blow ◆Automatic tool length measurement and automatic correction function (touch type) ◆Z-axis thermal variation correction function (extension and high-speed extension) ◆Axis core oil supply block (oil hole holder type) ◆Supports 2-sided constraint at the spindle end ◆Constant load control ◆Floor-mounted operation panel ◆Splash cover ◆ATTIncluded items1.Extension attachment L=600 mm, No.50, 6000 min-1 (37/30 kW) 2.High-speed extension attachment L=600 mm, No.50, 4000~15000 min-1 (15/11 kW) 3.90 degree angular attachment L=500 mm, No.50, 4000 min-1 (37/30 kW) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

FANUC31i BT50 ATC30 Table size 1550 x 760 Spindle speed 6000 rpm Stroke: X1540 Y760 Z660

Kobayashi Kikai Co.,Ltd.

Intex, Inc.

mazak FZ BT30 ATC14 pieces Table size 600 x 400 Spindle speed 12000 rpm Stroke X600 Y400 Z350

Kobayashi Kikai Co.,Ltd.

Professional5 HSK-A63 ATC 40 pieces, 400mm square, spindle speed 12,000 rpm, stroke X560 Y640 Z640, optional indexing, 2 pallets, rear-discharge chip conveyor

Kobayashi Kikai Co.,Ltd.

Professional5 HSK-A63 ATC 40 pieces, 400mm square, spindle speed 12000 rpm, stroke X560 Y640 Z640, optional indexing, 2 pallets, rear-discharge chip conveyor

Kobayashi Kikai Co.,Ltd.

◆Control device: OKK FANUC Ai ◆Travel distance XYZ: 720 x 510 x 460 ◆Distance from table top to spindle end: 100-560 ◆Distance from column front to spindle center: 532 ◆Size of work surface (X-axis direction x Y-axis direction): 850 x 510 ◆Allowable workpiece mass: 800 kg ◆Shape of work surface (T-slot nominal dimension x spacing x number): T18 x 110 x 5 ◆Height from floor to table work surface: 850 ◆Rotation speed: 100-12000 min-1 ◆Spindle end: No. 40 ◆Bearing inner diameter: Φ65 ◆Pull stud (nominal number): MAS P40T-1 (45°) ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (with adjacent tools): Φ78 ◆Maximum tool diameter (without adjacent tools): Φ110 ◆Maximum tool length (from gauge line): 300 ◆Maximum tool mass: Maximum 8/average 5/total 100 ◆For cutting oil (coolant): 240L ◆Machine height: 2635cc ◆Required area (left/right x depth): 2855 x 3015 ◆Machine weight: 5.5T [Special accessories] ◆Signal light: 3-light type Alarm: Red light with buzzer ◆Coil conveyor: 2 internal coil conveyors on the left ◆Air blow device ◆Each axis has grease terminal installed._If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko